Quoizel WKF8411EK Assembly Instruction Sheet

Quoizel WKF8411EK Assembly Instruction Sheet Manual pdf 1 page image

Package ContentsWarnings and Cautions1of2Assembly Instruction Sheet #IS-WKF8411EKFor Style WKF8411EK2017 QuoizelInc.Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We stronglyrecommend that a licensed, professional electrician perform the installation.Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.A Crossbar Assemblyx 1Please go to for product cleaning tips. Go to the selection.(3) B10 Candelabra Base bulbs 60W Maximum or(3) Candelabra Base T8 Vintage bulbs are recommended but not supplied.20-30 minutesIdentify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts arepresent. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacementparts.www.quoizel.com Care + MaintenanceLight Source:Estimated Assembly Time:Preparation:Fixture can only be mounted in the direction indicated on page 2.Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.Thank you for purchasing a Quoizel product.Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184or visit us on-line at www.quoizel.comC Fixture Bodyx 1BAlternateMounting screwx 2ReleasedDate:2017-09-29DGlassPanelx 4STEP 1 Install Glass Panels-A. Unscrew screws from the top edgeof the Cage (E) to remove glassholder.B. Insert Glass Panels (D) into the slotin the bottom edge of the Cage (E).Attach the glass holder onto the topedge of Glass Panels (D) and alignholes on it to mounting holes on theCage (E). Secure the glass holderwith removed screws. Tightengently until snug with screwdrivers.DScrewE Cagex 1ESlotGlassHolderSTEP 2 Install Cage-A. Remove lock screws from the bottom edge of the fixture hood.B. EAttach the Cage (E) with glasspanels to the fixture hood and secure with removed lock screws.Hand tighten until snug with screwdrivers.Align the label “A” on the top edge of the Cage ( ) to the label “A” inthe bottom edge of the fixture hood.Label “A”Label “A”CELock ScrewFigure 2Supply Wireswith Ground WireOutlet Box Screws(not included)OutletBox AMounting Screwor Alternate ShortMounting ScrewSTEP 3 Installing the Crossbar Assembly-A. Pass the supply wires through the Crossbar Assembly (A). Attachthe Crossbar Assembly (A) to the Outlet Box with the head of theGreen Ground Screw facing you. Secure the Crossbar Assembly (A)with Outlet Box Screws (not included). Tighten until snugNote: Use the Alternate Shorter Mounting Screw (B) if yourinstallation requires a shorter mounting screw..Figure 3

/ 2

Related manuals for Quoizel WKF8411EK