®RANGECORTEX NVRINSTALLER’S QUICK SETUP GUIDEFor full instructions see the Users Guide found on the USB pen drive provided with the NVRMore detailed instructions on how to operateyour NVR are included in the Quick Users Guide,which is on the setup USB pen drive included.We refrain from printing these large manuals inan effort to limit our impact on the environment.BEFORE INSTALLING ANYTHING WE STRONGLY RECOMMEND THAT YOU CONNECT YOUR CAMERAS TO YOUR DVR AND TEST YOURSYSTEM FIRST. WE CHECK EVERYTHING TO MAKE SURE IT IS WORKING WHEN IT LEAVES US BUT VERY OCCASIONALLY THINGS FAIL ANDIT IS BETTER TO KNOW NOW THAN AFTER YOU HAVE FITTED EVERYTHING!NVR PowerCortex NVR1. DEVICE CONNECTIONSSTILL NEED HELP?Then speak to our engaging technical team via ourwebchat service found upon our website:www.adata.co.ukor if you prefer to call: (023) 92488302Look for this webchatbubble on our websiteto connect to one ofour technical teammembers.Output to TV or MonitorPower AdaptorHDMI/VGA/RCAConnect themouse to theUSB socket1. 3.Ethernet ConnectionIP CameraPoE SwitchEthernet connectorto POE SwitchPOE Switchto NVR2.Connect camera’sethernet port to ethernetcable.Power AdaptorPower toPOE SwitchConnect camera to POEswitch to provide camerawith power.4. Complete ConnectionSetupConnect peripheraldevices to NVR andprovide power.Connect POE Switch toethernet port at the rearof the NVR.Ethernet Connection