RDS Technology Master Driers MMM 100 Software Update Manual
Also see for Master Driers MMM 100: Installation, Calibration and Operation
  |
S/DC/500-10-690 : ISSUE 3.0 : 9.11.12 UK690300.DOCCROP TYPEADJUST MOISTURE READINGIF THE INSTRUMENT MOISTURE READING IS DIFFERENT THANFROM A REFERENCE MOISTURE METER :-HOLD CAL UNTIL CORRECTION FACTOR (%) IS DISPLAYEDTHEN PRESS TO DECREASE % OR TO INCREASE %.FOR BEST RESULTS, ALWAYS ADJUST THE MOISTURE TOMATCH A PRE-DETERMINED DRIED SAMPLE !TEMPERATURE DISPLAYPRESS TO DISPLAY TEMPERATURE(RETURNS TO % MOISTURE DISPLAY WHEN RELEASED)CHANGE CROPHOLD FOR 2 SECONDS THEN PRESS TO SELECTCROP A - FTHERE ARE 6 PRESETS A-F. THEY CAN BE RE-CONFIGURED IFREQUIRED. (REFER TO MANUAL).CROP PRESET CUSTOM SETTINGA WHEATB BARLEYC OATSD OILSEED RAPEE BEANSF MAIZEMOISTURE % ALARMSLOW MOISTURE % ALARM THRESHOLDS ARE PRESET FORCROPS A - F. THE DISPLAY FLASHES AND AN AUDIBLE ALARMSOUNDS WHEN THE MOISTURE CONTENT REACHS THETHRESHOLD.PRESS TO CANCEL THE LOW MOISTURE ALARM.MOISTURE DISPLAYADJUST DISPLAYED TEMPERATUREHOLD THE TEMPERATURE BUTTON DOWN, AND AT THE SAMETIME PRESS TO DECREASE OR TO INCREASEVALUE.CALMODE |
Related manuals for RDS Technology Master Driers MMM 100
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine