REFLEX ACTIVE 14 Series Getting Started
      |
BLUETOOTH CALLING FUNCTIONPART A HOW TO CONNECTPART B HOW TO DISCONNECTPlease take a few minutes to read through these instructions,they will help ensure you get the best from your smartwatch. Youcan also visit our website or scan this QR code for lots of helpfulinformation and video guides. And of course, if you have anyquestions, please get in touch, we’re here to help!Series 14/15 - getting startedTo download our app, search for REFLEX ACTIVE RED App . or scan the appropriate QR codefor installation. Use your smart phone camera or QR code reader app.COMPATIBILITYCONNECTING YOUR SMART WATCH TO MOBILE PHONE1. Enable Bluetooth on your smart phone.2. Open the REFLEX ACTIVE RED App. on your smart phone.3. To connect your watch, tap on the “add a device” green icon & select your watch from the list.Please note: You’ll need to connect for calling to be enabled. See instructions below.DISCONNECTING YOUR SMART WATCH & PHONE1. Open the REFLEX ACTIVE RED App. on your smart phone.2. Tap disconnect device in Settings.3. You must also forget your device on your smart phones Bluetooth settings.DOWNLOADING THE REFLEX ACTIVE RED App.The REFLEX ACTIVE RED app will work on the following smartphones:• Android (version 5.0 and above)• Apple IOS (version 9.0 and above)Please ensure the app is the latest version and has Bluetooth 5.0www.reflex-active.com/pages/support+44 (0)121 524 1400 support@reflex-active.co.ukThis watch comes with a special Bluetooth calling feature. You can make calls without having to unlock the phone.You can also view your call history. The connection between the watch and your phone will need to be kept stablewhen using the calling function.The watch also has a microphone and a built in speaker for use when making phone calls, listening to music andother notifications. Follow the steps to activate the calling function and much more:To disconnect Bluetooth calling, go to the phone’s Bluetooth setting and “unpair” the “Audio-Series 14/15”. There isalso a shortcut to temporarily switch this off on top of the settings page.PART C ADD CONTACTSYou can add up to 8 contacts on your watch. Add contacts from the REFLEX ACTIVE RED app. To add contacts go to“Favourite Contacts” and add contacts. The selected contacts will then be synced to your watch.There are three tabs on this screen:• Recent calls• Dial pad• Contacts• Step 1: After connecting the watch to the REFLEX ACTIVE RED app, you need to go to the Bluetooth settings ofthe phone and pair the watch.Android & IOS: Switch on Bluetooth in your phones Bluetooth settings and you should see the available device as“Audio-Series 14” or “Audio-Series 15” depending on your system. Tap on the device name and accept the Bluetoothpairing request. To have full functionality we recommend allowing permissions.Once connected you should see that the device is “connected for calls”.• Step 2: Go to your watch and swipe left to the features page and locate the phone function.• To switch on the watch, press and hold the side button until the display is on.• Switch off - By long pressing the side button, or through the settings/more functions.HOW TO CHARGEPOWER ON / OFF1. Line up the 2 pins to the charging spots on the back of the watch case.2. The pins are magnetic and will secure the charger in place.3. Plug in the USB cable to a power source. Once connected, the charging icon will appear on screen.4. Please charge the band when it displays low battery.5. A 2 hour charge time is sufficient to fully charge your smartwatch. Please ensure you do not exceed a 2hour charge period.When you tap on the dial pad you can then dial a number to call. Once you have dialedthe number the call button on the bottom right corner will appear.If you tap on the recent calls tab you can see the recent calls on your device.On the REFLEXACTIVE RED apptap on “FavouriteContacts” to addyour contacts.Once you tap on the call button the number will then be called.• You can speak through the in built microphone on your watch.• To adjust the speaker volume tap on the + or -• To end the call tap on the red phone iconSelect thecontacts youwould like to addand save.The battery lasts for 2 to 3 days with Bluetooth calling mode enabled. On standby the battery can last forapproximatley 5-7 days.PART D SWITCH BETWEEN PHONE AND WATCHPART E BATTERY ADVISORYSwitch between watch / phone during an active call: If your watch isconnected to your phone via Bluetooth, all calls will show up on the watchby default. If during an active call you would like to switch to your phone,simply tap on the handset earpiece icon to select it. The call will thenswitch to your phone. 0770 090 0202SERIES 15_AUDIOIncoming CallWhen Bluetooth calling mode is activated the watch will ring and vibrate. You cananswer or reject the call.Please note: Internet calls such as Whatsapp will show as notification only. |
Related manuals for REFLEX ACTIVE 14 Series
manualsdatabase
Your AI-powered manual search engine