RabbitCore RCM3000C-Programmable Module with EthernetGetting Started Manual019–0109 • 050131–E

Rabbit RabbitCore RCM3000 Getting Started Manual

Adapter Boards Use

RCM2100

RCM2200

RCM2300

BL1800

Universal 2 mm to 0.1" Adapter

RCM3400

Mechanical Specifications

Schematics

RabbitCore RCM3000

Chapter 1. Introduction

Advantages of the RCM3000

Online Documentation

Chapter 2. Hardware Setup

Hardware Connections

Connect Programming Cable

Connect Power

Run a Sample Program

Where Do I Go From Here?

Introduction

Sample Programs

Serial Communication

Other Sample Programs

RCM3000 Digital Inputs and Outputs

Memory I/O Interface

Serial Programming Port

Serial Programming Cable

Standalone Operation of the RCM3000

Other Hardware

Memory

More About Dynamic C

Dynamic C Functions

Prototyping Board Functions

Upgrading Dynamic C

TCP/IP Connections

TCP/IP Primer on IP Addresses

IP Addresses Explained

How IP Addresses are Used

Dynamically Assigned Internet Addresses

Placing Your Device on the Network

Running TCP/IP Sample Programs

How to Set IP Addresses in the Sample Programs

How to Set Up Your Computer's IP Address for Direct Connect

Run the PINGME.C Sample Program

Where Do I Go From Here

A.1 Electrical and Mechanical Characteristics

A.1.1 Headers

A.2 Bus Loading

A.3 Rabbit 3000 DC Characteristics

A.4 I/O Buffer Sourcing and Sinking Limit

A.5 Conformal Coating

A.6 Jumper Configurations

B.1 Introduction

B.1.1 Prototyping Board Features

B.2 Mechanical Dimensions and Layout

B.3 Power Supply

B.4 Using the Prototyping Board

B.4.1 Adding Other Components

B.4.3 Other Prototyping Board Modules and Options

B.5 Use of Rabbit 3000 Parallel Ports

C.1 Specifications

C.2 Contrast Adjustments for All Boards

C.3 Keypad Labeling

C.4 Header Pinouts

C.5 Mounting LCD/Keypad Module on the Prototyping Board

C.6 Bezel-Mount Installation

C.6.1 Connect the LCD/Keypad Module to Your Prototyping Board

C.7 LCD/Keypad Module Function Calls

C.7.3 LCD Display

C.7.4 Keypad

C.8 Sample Programs

D.1 Power Supplies

D.1.2 Reset Generator

E.1 Overview

E.2 Header J6

E.3 Using Parallel Port F

E.4 PWM Outputs

E.5 PWM Registers

E.6 Quadrature Decoder

Index