Radomir Bednar BMA-PLUS Operating Instructions Manual
    |
Radomír Bednář, production of fishing tackle andmetal-working productionV kotlině 16, 77900 Olomouc, Czech Republic, IČO: 13239449tel. +420585224291, e-mail: radomir.bednar@volny.czweb: http://www.r-bednar.czControl panel BMA-PLUSCONTENT: DescriptionOperating InstructionsSafety InstructionsTechnical DataTroubleshootingBlock DiagramDESCRIPTIONControl panel BMA-PLUS is designed for adjusting the AC voltage from electric generator (230V) forfishing purposes. AC from electric generator is adjusted using the phase-controlled one-way rectifier, whichis handled using the power potentiometer. Specific shape DC pulses temporarily stupefy fish but don’t hurtthem. On the control panel, there is MAIN SWITCH (0,1), POWER SCALE SWITCH (0,1), potentiometerknob for continuous power adjustment and fuse case with T2.5A fuse. Ammeter shows mean values ofoutput current (peak value is higher) and those values are of informative character for the operator and forthe instrument operation. Output current value directly corresponds to fishing environment properties(water conductivity, etc.). Voltmeter shows mean values of output voltage. On the side of the control panel,there are sockets for connecting the anode (+ sign) and cathode (- sign).Basic instruments for electrofishing are: fishing handle with extension and electric landing net (anode),cable and cable drum, drum support, cathode, grounding pin and dielectric gloves.Control panel BMA-PLUS is suitable for waters of water conductivity 150-1500μS.The product complies with the technical requirements on products as per the Act No. 22/1997 Coll.,Government Regulation No. 17/2003 Coll., and Government Regulation No. 616/2006 Coll. anda Declaration of Conformity was issued for the product. |
Related manuals for Radomir Bednar BMA-PLUS
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine