Rae RAELink3 Quick Reference
Also see for RAELink3: User guideConfiguration guideQuick referenceUser guideQuick reference
    | |
The RAELink3 compact, portable radio-frequency modem provides long-rangewireless communication between remote portable air monitors and a basestation/computer for comprehensive monitoring. Up to 64 RAELink3-equippedmonitors can be networked with a single Host. For applications requiring long-distance monitoring or monitoring in locations with obstructions to clear line-of-sight communication, RAELink3s configured as Repeaters extend the effective reachof the system.RAELink3Q U I C K R E F E R E N C EThe RAELink3 can be configured to act in one of the following modes:1. Remote. The RAELink3 Remote functions as a slave modem andcommunicates to a host modem with the same network ID.2. Remote G. The RAELink3 Remote G functions as a slave modem tocommunicate readings from a GammaRAEII R personal radiation detector to ahost modem with the same network ID.3. Host. The RAELink3 Host functions as a host modem and communicates withmultiple wireless modems (such as the RAELink3 Remote and RAELink3Repeater, as well as AreaRAE products equipped with RAELink-family Remotemodems) with the same network ID.4. Repeater. The RAELink3 Repeater functions as a repeater for RAELink3Remote modems (or AreaRAE or RAELink series products) with the samenetwork ID.Connection With Third-Party DevicesThe RAELink3 can be configured as a slave modem to communicate sensor datafrom select 3rd party monitors back to a host modem with the same network ID.Current third-party monitors available to choose from include ChemRAE,LifeShirt, DustTrak and AP4C.Battery ReplacementThe RAELink3 can use a rechargeable lithium-ion battery or an alkaline batterypack. It can also be operated on its charger. To take the rechargeable battery oralkaline battery pack out of the RAELink3, remove the 3 hex-socket screws andlift it out. To replace the AA batteries in the alkaline battery pack, remove thetwo hex-socket screws on the inside, remove the cover, and replace the 5 AAbatteries (Duracell MN1500 or Energizer E91 only). Make sure that the polarity(“+” and “-”) for each battery is correct. Do not mix old and new batteries. Onlychange batteries in a non-hazardous location.Additional Information And SupportRead the RAELink3 User’s Guide for additional information on features andsettings, as well as regulatory information not covered in this Quick Reference.For support, contact RAE Systems Technical Support at (888) 723-8823, or emailtech@raesystems.com. |
Related manuals for Rae RAELink3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine