Rainier Kestrel Assembly
  |
TIPI ASSEMBLYKESTREL ASSEMBLY5'-5"Assemble the Door FrameLocate the 4 pieces for the frame- 1x Header - Curved with rafter brackets on top- 1x Footer - Curved without rafter brackets- 2x Vertical Sections - Long pieces with angle bracketsAssemble door frame with provided screws using 1x “L” bracket at eachcorner. Nuts should go to outside of frame.Stand door frame upright123Attaching the LatticeLay lattice on the ground, each person should grasp one side of the lattice wall and moveoutwards, elongating the lattice until it measures 5’ 5” from top to bottom.With each person grasping the lattice about 1/3 of the way in, stand the lattice upright.12Attach one end of lattice todoor frame, where itconnects to aluminum “L”bracket at the door. Thebrackets will line up with theX’s on the end of the lattice.Use the smaller white zip-tiesto attach to door frame.3 Take the tension strap, andinsert in between each “X”along the top of the lattice.Secure the band as shownwith the cam buckle, andtension to the black mark onthe webbing.4Aluminum "L"BracketHEADERFOOTERBrackets Face UpwardsCam BuckleTOOLSWe recommend you source and prep your tools before heading to your site.In addition, be sure to have hard-hats and first aid materials on hand!Two PeopleOR OR |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine