Rayleigh Instruments RI-ENERGYFLOW-MODULAR Series Quick Start Installation Manual

Also see for RI-ENERGYFLOW-MODULAR Series: User manual

Rayleigh Instruments RI-ENERGYFLOW-MODULAR Series Quick Start Installation Manual Manual pdf 1 page image

Telephone : +44 (0) 1245 428500Email : sales@rayleigh.comRI-ENERGYFLOW-MODULAR SERIESwww.rayleigh.com 1Rayleigh Instruments LimitedQuick Start Installation GuideGetting StartedStep 1: Remove all modules from the cardboard boxes and associated packaging materials. Ensure that the brackets and includedaccessories are kept.Step 2: Inspect all parts for damage. Do not proceed with the installation if damage is observed. If in doubt please call the supplier.Step 3: Ensure all accessories are present and correct. The included accessories should be as shown below.any work on the system.Ÿ Do not remove or dismantle the device modules. There areno user serviceable parts within the products. Dismantling ortampering with the modules will void the warranty.Ÿ Check all wiring connections before energising any part ofthe system.Ÿ Read the full user manual prior to commencing installation.Ÿ Isolate all power supplied to the device prior to undertakingŸ Suitable RCD protection must be installed according to localwiring regulationsInstallation safety precautions:Ÿ This system must only be installed by qualified personnelfamiliar with applicable wiring regulations.Ÿ Only clean the modules with a clean cloth.Inverter Module Accessories:4off M5x12mm Screws 2 pairs of MC4 plugs 1off WIFI Module 1off AC Grid Connectorand 2.5mm Allen Key1off Back-up Connector2off Mounting Screwsand Nylon Wall Plugs1off DRM Connector(6Way)1off Wall Bracket 1off Current Transformer1off CT/ Meter Connector(4Way)Battery Module Accessories:4off Mounting Screwsand Nylon Wall Plugs3off M5x12mm Screws 4off M6 Flat Washers 1off Wall Bracket Wiring Kit ****An additional wiring kit will be required if the installation contains more than one battery module. Refer to table below.Wiring Kits for Additional Battery Modules:Total Number Of Battery Modules Wiring Kit Part Number234RI-MOD-KIT10.2RI-MOD-KIT15.3RI-MOD-KIT20.4E&OE. Please check critical parameters at time of order. ISSUE : 20221107