Raypak PS270VSP Quick Start Manual
  | |
Contents | 
Catalog No. 6200.183 Replaces: NEWEffective. 06/2013POWERSAVERCLEANOVERRIDEHIGHOVERRIDELOWBACKPOWERFAULT+-SET1 23456Controls &LEDs Description1 Display Screen2 LED LightsPower: Light (Green)Fault: Light (Red)3 BACK: returns to previousprogram setting and does NOTaccept current screen values4 Navigation Selector + or – increases/decreasesselected value ← or → Navigates to adjust-able value (digit) SET accepts the currentscreen values5 Interface Selector6 Override ButtonsNOTE: The selector knob must beturned to RUN for the pump to oper-ate. When the user presses ← or →button the cursor moves to the nextor previous position. If the cursor isat the end of a line when the userpresses the arrow, the cursor movesto the next line.PS270VSPQuick Star t GuideUser Interface & Navigation Over viewWARNING: This product must be installed and serviced by a qualified pool professional,and must conform to all national, state, and local codes. Before installing this product,read and follow all warning notices and instructions of this product. Failure to followwarning notices and instructions may result in property damage, personal injury, ordeath.Only the clock setting is required to enable the PS270VSP to operate at three differentspeeds and durations using the pre-set schedule. The preset speeds and scheduletimes are detailed in the manual on page 14. Observe all safety warnings and cautions Verify the user interface is plugged in Make certain the motor is properly wired Turn selector knob to SET CLOCK Set the Time and Date using the +, -, ←, → buttons Turn the Selector knob to RUNNOTE: Must wait until “PRIME MODE” is complete to make changes to OVERRIDEsettings.Pre-set Schedule |
Related manuals for Raypak PS270VSP
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine