The Jem Saw 45 will cut slabs of any length with the addition of the slabbingtable (stock #20-041). This option allows over the arbor trimming in the case oflarge or odd shape slabs. Figure #3 is a top view of the installed slabbing table.CLEANING SUMPThe plastic sump liner has been designed to be easily removed and cleanedwhen sludge from cutting builds up. Follow instructions for mounting the blade,up until Step 3. At this point, the sump liner can easily be lifted free from thesaw and cleaned.SHARPENING BLAZER BLADESRaytech Red Blazer blades are exceptionally free cutting and seldom, if ever,require sharpening. However, if the blade is used exclusively on agate or jade, orif the blade has been used to cut hard materials with a water based coolant, theblade may require dressing (sharpening). You can effectively sharpen your bladeby cutting 10 sq. in. of an old 100 grit or 220 grit silicon carbide lapidary grind-ing wheel. Raytech sells a blade sharpening stick made especially for this pur-pose. (Stock #32-017)Raytech IndustriesA Division of Lyman Products475 Smith Street, Middletown, CT 06457Tel (860) 632-2020 Fax (860) 632-1699Visit us on the web @ www.raytech-ind.comInstruction No: 04297 08/10RAYTECHJEMSAW45Operating Instructions forJem Saw 45