Redi Shade easylift Quick Manual
Thank you for your purchase of EASY LIFT.What’s Included:Easy Lift Shade with Trimming Scale | Trimming GuideMeasure your window width in 3 locations. Use thesmallest measurement.(Please note our patented cutting scale already takesinto account the clearance deduction for inside mount.)12MeasureTrim3 Install & Operatea) Peel to remove liner.©2015 Redi Shade, Inc. www.redishade.com 021715b) Press firmly across width ofshade to install.c) Pull shade down to lowerand push up to raise.View the Easy Lift trimming and installation video at www.redishade/easy-lift.com.Customer Service: 1-888-608-6611A smooth kitchen knife with a 3.5” inch blade is recommended.1) Remove bottom rail end caps.2) Place cutting guide at exact desired width. (No clearance deduction needed; it’s already included).3) Position the knife blade at an angle on the top of the shade at your exact measurement.a) Press firmly cutting through rails and fabric with a rocking motion and constant pressure.b) Trim each side of the shade to the same exact window measurement.4) Replace end caps on bottom rail.1 2 3 4 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine