Redpine Signals, Inc. Proprietary and ConfidentialRS9110-N-11-22 – Wireless Device ServerModule Integration GuideRedpine Signals, Inc.2107 N. First Street, #680San Jose, CA 95131.Tel: (408) 748-3385Fax: (408) 705-2019Email: info@redpinesignals.comWebsite: www.redpinesignals.comDownloaded from Arrow.com.

Redpine Signals RS9110-N-11-22 Integration Manual

System Overview

Scope

Getting Started

Configuring the RS9110-N-11-2X Module

Figure 4: Wi-Fi Config Utility Startup Screenshot

Initialize the COM port of the PC

Figure 6: COM Port Name

Scan

Connect to a Scanned Access Point in Infrastructure Mode

Connect to an IBSS Network

Connect to a Hidden Access Point

IP Address Configuration

DHCP Configuration

Disconnect from Access Point

TCP (UDP)/IP Evaluation

Peer Application

Figure 16: Startup window for UDP Server Application

Figure 17: Startup window of UDP Client Application

Create Sockets

Figure 20: Socket type – TCP

Figure 22: Socket type – LTCP

Send And Receive Data (UDP, TCP Client, LUDP)

Figure 25: Parameters and Result for Send and Receive Data on TCP Socket

Send And Receive Data (TCP Server)

Close Sockets

Power modes

Figure 31: Power Mode 1 - Before WLAN Connection

Figure 32: Power Mode 2 - Before WLAN Connection

Figure 33: Power Mode 1 - After WLAN Connection

Firmware Upgrade

Figure 35: Prompt to upgrade firmware

Figure 36: Transferring "taim1

Figure 37: Firmware upgrade successful

Components on the EVB and their Usage

DIP Switches

Header J7

RS9110-N-11-22