Redx RX-2505PW Quick Start Manual
Also see for RX-2505PW: User manual
This drawing is for reference only. Please refer to the actual product.≥300mm ≥300mm600900The size and parameters of the product are subject to change without notice.http:// www.redxenergy.com.auAPP DownloadAll-In-One Energy Storage Systemwww.redxenergy.com.auRX - 2505PWSafety StatementDangerWarningWarningNoticePacking ListInstallation LocationDimension145This document is subject to change from time to time due to product upgrades or other reasons.This document is not a substitute for the user manual or safety instructions.Please read the user manual and related standards before undertaking any operation orcommissioning. Please take time to access http: //www.redxenergy.com.au or scan the QR code forthe latest quick installation guide.Failure to comply with any of the above requirements may result in injury to personnel or damageto equipment.Prior to commencement, check whether the goods match the packing list, if there is any damageto any items or components missing, please contact the Distributor / Dealer or Redx.The power cables must be intact and well insulated. Please use insulating gloves and wear personalprotective equipment at all times when installing this product.All safety labels, warning labels, and nameplates must be clear and visible and cannot beremoved or overwritten.Hot surface!Inverter module may become hot after extended period of operation. Allow time for inverterto cool before touching!The country setting and protection parameters must be set by professional personnel basedon local power grid standards.Incorrect country settings may affect the operation failure to meet the local standard.Warning LabelDisconnect all external power supplies beforemaintainace.Device only has high voltage on AC input andAC output. professional and qualified techniciansare not required to install this unit.Hot surfaces!Read the instructions beforeoperation.Wait for 5 minutes before touching the internal conductive components after systemturn off and disconnected from grid.RX-2505PW 1PCS 1PCS 8PCS 1PCS 1PCS5PCS 1PCS 1PCS 1PCS 1PCS5minShock hazard!Exposure to sunlight and the elements are not recommended.All electrical connections must meet local and national electrical standards.Only connect the system to the grid with local authority approval .Redx shall not be liable for any loss of life or damage caused by failure to comply with therequirements of this document and user manual.Hot surfaceWarranty will be void if the cover is removed. Improper opening of the unit may also result inserious electrical shock or injury to personnel.RJ45 M6 boltsM4 Document M5 lugs4 Pin CTconnector CTBracket Hole template |
Related manuals for Redx RX-2505PW
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine