Regent Lighting Solutions Lumina Installation Instructions Manual
  |
12www.regentlight.co.zawww.regentlight.co.zaINSTALLATION INSTRUCTIONSALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIANALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN1PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.Regent Lighting reserves the right to change specifications modify designs and discontinue items withoutincurring obligation and whilst every effort is made to ensure that descriptions, specifications and otherinformation in this catalogue are correct, no warranty is given in respect thereof and the company shall not beliable for any error therein.WARNING: TO AVOID FIRE, SHOCK OR DEATHALL LUMINAIRES SUPPLIED AND TO BE INSTALLED ABOVE AND BELOW 5 METERS ARE IN COMPLIANCE WITH SANS60598 SECTION 3.5.6 ACCORDING TO THE MANUFACTURER GUARANTEE AND WARRANTYTURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRINGElectrical products can cause death, injury, or damage toproperty. Installation of this product must be carried out by aqualified electrician, in compliance with SANS 10142 orcorresponding regulations of the country of installation. Oncompletion of installation, the Certificate of Compliance mustbe updated.LuminaWARNINGElectronic Control Device Electronic Control DeviceWARNING3 - 13 MAIN REEF SERVICE ROAD, CORNERSPRINGBOK AND MAIN REEF ROAD, INDUSTRIA,JOHANNESBURG. SOUTH AFRICA.TEL : +27 11 474 0171www.regentlight.co.zaREGENT LIGHTING A DIVISIONOF WAHL INDUSTRIES.Requirements:1. Ensure the pole is installedcorrectly.Ÿ Be sure the electricityto the system you areworking on isisolated.DO NOT PLUG(CONNECT) WHENLIVE AS IT WILL CAUSEDAMAGE TO THELUMINAIRE.DO NOT CONNECT THE FITTING LIVENovember 2017Save These Instructions for Future ReferenceELECTRICAL CONNECTIONSConnect the SwitchedLive (S/L), Neutral (N)and Earth (E) cable(s)to the terminal block.SWITCHED LIVE – (Redor Brown) to terminalmarked LEARTH –(Green/Yellow) toterminal marked E.2. Connect theelectrical cable tailsupplied through thespigot/gland to theaccess door.NEUTRAL – (Black orBlue) to terminalmarked NA: SPIGOT B: DIRECT MOUNTED2Save These Instructions for Future ReferenceSave These Instructions for Future ReferenceELECTRIC SHOCKHAZARDThis equipment is to beserviced by trainedpersonnel only.ELECTRIC SHOCKHAZARDThis equipment is to beserviced by trainedpersonnel only.LuminaSURFACESURFACE |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine