Optigo OP10OP10Pre-programmed, configurable controller forsimple applicationsThe Optigo OP10 range of controllers controlstemperature. They are intended for DIN-rail mounting.Optigo OP10 is a pre-programmed controller that canbe used for control of temperature in air handling andheating applications. It is a stand-alone controller forsimpler applications. Optigo is extremely easy to install,commission and control.Optigo uses a display with an encoder knob, makingits built-in menu system very easy to use. Settingsare entered by turning the encoder knob to a desiredparameter/value. A value is then approved by pressing theknob.ModelsThe Optigo series comprises two different models, OP5Uand OP10.OP5U has 5 in-/outputs and OP10 has 10 in-/outputs.OP10 is available in two models:• OP10 with 24 V AC supply voltage• OP10-230 with 230 V AC supply voltageApplications for OP10 and OP10-230Optigo OP10 is pre-programmed with a choice of fivedifferent control modes:1. Supply air control2. Supply air control with outdoor compensation3. Cascaded room / extract air temperature control4. Radiator circuit control5. Domestic hot water controlInputs and outputsOptigo OP10 has:• 2 analogue inputs, PT1000• 1 SPI input for an external setpoint device• 1 universal input, PT1000 or digital• 2 digital inputs• 3 digital outputs• 2 analogue outputs, 0…10 V DCInternal clockOptigo OP10 has a built-in week-based real time clockwith a number of different scheduler alternatives.Easy to installOptigo is suitable for DIN-rail or cabinet mounting. Sincethe terminals are detachable, all connections can be madebefore Optigo is installed.Optigo has been developed in accordance to our Ready-Steady-Go concept, simplifying every step from installation tomanagement.• Language independent• Simple configuration via the backlit display• Input for external setpoint device• Pre-loaded with several application modes• 24 V or 230 V AC supply voltage• Week-based clock / calendar functionrevision06 2017