Regin RVAN10-24 Instruction
    |
INSTRUCTIONi Read this instruction before installationand wiring of the productRVAN10-24Valve actuator for 3-point controlRVAN10-24 is a valve actuator designed for control of Regin valves.For more info, see the product sheet of each valve. The actuator canalso be combined with other brands of valves using adapter kits. Theactuator can be operated manually.Technical dataSupply voltage 24 V AC ±15 %, 50/60 HzControl signal 3-pointMax. power consumption 6.2 W / 6.7 VAStroke 10...30 mmStroke time 3 s/mmForce 1000 NAmbient temperature 0...50°CStorage temperature -40...80°CAmbient humidity 10...90 % RHDimensions 198 x 266 x 133 mmProtection class IP54InstallationIf the valve stem adaptor and valve throat adaptor are not already mount-ed on the valve, mount them. Pull the valve stem out as far as possible.Remove the locking bolt (U-bolt) from the actuator yoke. Insert the valvestem into the yoke and make sure that the stem adaptor engages the holein the angled iron of the actuator drive spindle.The groove in the valve throat adaptor must be made to line up with theU-bolt mounting holes on the actuator. If the spindle needs moving in orout for this to happen, depress the central part of the manual button andturn it clockwise for the actuator spindle to extend, and anti-clockwise forit to retract (see Manual override). When the valve is in the correct posi-tion, insert the U-bolt. Tighten the bolt nuts until the valve is firmly gripped.Disassembly in reverse order.Mounting positions90º90ºWiring24 V AC1 2 3 123G2 G1G1 closed = Actuator spindle extendingG2 closed = Actuator spindle retractingStroke and end position calibrationStroke and end position calibration is not necessary due to a constructionutilizing end position stops. When the valve reaches the end position, aforce is generated. Once the force of the actuator reaches a predefinedlevel, the limit switch automatically halts the drive motor.Manual overrideTo manually set the valve position, first depress the central part ofthe button until it clicks and remains depressed (1 in the figure). Thisdisengages the gears and also cuts the power to the motor. Then thevalve position can be changed manually by turning the button (2 inthe figure). Clockwise rotation will extend the drive rod and anti-clock-wise will retract it.To reconnect power, set the button so the flats are in line with thecutout in the edge of the cover, Auto position. Then press on the outerparts of the button (3 in the figure). The central depressed part willpop out re-engaging the gears and reconnecting the power.This product carries the CE-mark. More information is available atwww.regincontrols.com.ContactAB Regin, Box 116, 428 22 Kållered, SwedenTel: +46 31 720 02 00, Fax: +46 31 720 02 50www.regincontrols.com, info@regin.seRVAN10-2410571DMAY 18EN1 |
Related manuals for Regin RVAN10-24
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine