Remington Solar Attic Fan Manual
      |
- 1 -Get the latest Remington Solar product manuals at:http://remingtonsolar.com/product-manuals/Thank you purchasing the Remington Solar Attic Fan. Please take the time to read through theentire instructions prior to staring any work.NOTE: When you first unpack your solar attic fan and place it in the sunlight, it may notimmediately turn on. Check the following:1. Determine if the outside temperature is 82 degrees Fahrenheit. The built-in thermostat willprevent the unit from starting below 82 degrees.2. Make sure the thermostat/humidistat (blue plastic piece) wiring is connected snugly. Thethermostat/humidistat is connected by a simple three pronged plug that should be connected whenyour solar attic fan arrives.3. Make sure the unit is getting sun with no clouds. Sometimes the unit will spin slowly or not atall with thick cloud cover.4. If it is cool outside and you want to test your fan, you may cup the thermostat in your hand andbreathe heavily on it. That will typically kick on the fan.Tools RequiredReciprocating Saw Marking Pen Measuring Tape StringRazor Knife Screw Gun Caulking Gun Ladders6, 6# 1½ Phillips Head ScrewdriverNOTE: Please go to http://remingtonsolar.com/how-to-install-your-remington-solar-attic-fan/ (orgo to RemingtonSolar.com and look for the link How To Install Your Remington Solar Attic Fan)to watch a brief video of an actual installation.Model # SF20 Model #SF25 Model #SF-30 |
Related manuals for Remington Solar Attic Fan
manualsdatabase
Your AI-powered manual search engine