SAGEMCOM Fast 5260 Instructions Manual

SAGEMCOM Fast 5260 Instructions Manual Manual pdf 1 page image

Safety and Certifications253584659-A 20 January 2014 4Safety and Certifications253584659-A 20 January 2014 1Important Information about the Sagemcom Fast 5260:Installation and Safe Usage Instructions:1. Place the router in a vertical orientation on a flat surface.2. Connect the manufacturer supplied AC to DC power adapter. The Fast 5260 router requires the use ofa 12 VDC, 2.5 A power adapter. Only use a manufacturer supplied and approved power adapter andEthernet cable.3. Connect the Fast 5260 to the AC Mains in accordance with the installation instructions in this booklet,and the markings on the identification label (voltage, current, and frequency of electricity network).4. Connect the Ethernet cable (provided) to one of the RJ45 ports on the Router labeled "1", "2", "3", or"4". Then connect the other end of the Ethernet Cable to the Ethernet port of a computer. Repeat asnecessary for the other available Ethernet ports.5. For an Ethernet WAN configuration, connect the RJ45 port labeled “wan” to the connection provided byyour ISP.When using this device, basic safety precautions should always be followed to reduce the risk offire, electric shock, and injury to persons including the following:1. Do not use this product near water and avoid contact with moisture. For example, do not use near abathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Careshould be taken so that liquids are not spilled on this equipment.2. This equipment is for indoor use only, do not place or install in an outdoor location.3. Place your product on a firm, solid surface, no obstacle at a minimum distance of 20 cm (0.65 ft). Ifyou put it on something unsteady, it may fall and be damaged. If you place it on a soft surface, suchas rug, sofa or cushion, the vents may be blocked, causing the product to overheat.4. Never insert objects into the vents of this equipment as this can result in the risk of electrical shock orfire.5. As the power adapter is the only way to connect to the electrical network, the product must beinstalled near an easily accessed power outlet.6. This equipment should only be operated from the type of power supply (Voltage and Current)indicated on the marking label.7. Do not overload wall outlets or extension cords. Doing so can result in the risk of fire or electricalshock.8. Avoid blocking any vent openings or exhaust exits on this equipment. Do not place equipment in abuilt-in installation such as a cabinet that may impede the flow of air through the ventilation openings.9. The equipment should be situated away from heat sources such as radiators, heat registers, stoves,or other heat producing appliances and equipment.10. Care should be taken to ensure that the power cord is routed, so it is not likely to be walked on orpinched by items placed upon or next to it.11. Unplug this equipment before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dampcloth for cleaning only.12. This equipment is not user serviceable and is to be serviced by qualified personnel only. Do notdisassemble this equipment. If service is required, disconnect all power from the equipment andconsult qualified service personnel.13. To disconnect this equipment from AC power, unplug the power supply from the AC wall socket.14. Connect only to in house equipment (SELV interface). It is not allowed to connect to public cabledistribution or cable television network.15. Use the product in the environment specified as below:- Air temperature between 0 °C and + 40 °C.- Relative humidity between 20 % and 90 %.- Altitude: 2000 meters (6562 ft) maximum.Save these Instructions!

/ 2

Related manuals for SAGEMCOM Fast 5260