SAL PIXIE STS600BTAM Quick Start Manual
Also see for PIXIE STS600BTAM: Quick start guide
Due to continued product and information updates, product data sourced from sal.net.au shall not form part of any contract and or technical performance guaranteeunless expressly confirmed in writing by SAL at the time of order.The product wireframe drawings in this document are intended for illustration purposes only and may differfrom the final physical product. The installation instruction is subject to change without prior notice.STS600BTAMSmart TimerSwitch G3Quick Start GuideVersionDate1.009/12/20221. ForewordIMPORTANT: IN THE INTEREST OF PRODUCT PERFORMANCE AND SAFETY PLEASE READ THESE GUIDE AND WARRANTY INSTRUCTIONS BEFORE INSTALLING THE PRODUCT.2. Product IntroductionPIXIE Smart Switch G3 is the third generation smart time delay switch, thatpermits the supply of electricity to the load for a predetermined time durationafter being triggered.2.1 Product Features• Fits most branded switch plates• Fits 1 to 6 gang wall plate installation• Over temperature protection, overload protection, short circuit protection• Automatically turns off after a predetermined time duration• Time duration can be programmed manually and via the App. Whenprogramming manually, only hourly timer functions can be set, the period isfrom 1 hour to 24 hours. When programming via the App, the time durationcan be set from 1 minute to 24 hours• Manual override function available• Multiway control - When pairing multiple PIXIE multifunction control device(e.g. SMF/BTAS) with the same smart Timer Switch, multiway timer control isachieved• LED indicator can be enabled and disabled in the App• In the last 1 minute of timer mode, the LED indicator flashes quickly indicatingimminent time out2.2 The package includes• PIXIE Smart Timer Switch G3 * 1• Extra key caps * 2• Silicon spacer * 1• Load correction capacitor * 1• Quick Start Guide * 12.3 Product illustration*3. Specifications3.1 Basic specifications3.2 Load rating 3.3 Load compatibility4. Wiring and InstallationDIY*All drawings shown are for illustration purpose only, actual product may vary dueto product enhancement.LED indicatorDefault key cap(Interchangeable)STS600BTAM - Standard wiring diagramNEUTRALACTIVELight fitting(Load)STS600BTAMSTS600BTAM - Optional wiring diagramNEUTRALACTIVELight fitting(Load)Optional - load correction capacitorin parallel with the load if requiredSTS600BTAMThe complimentary capacitor given in the carton operates as a loadcorrection device to assist improving compatibility performances.Compatible Loads240V halogen lampCFLIncandescent lamp YesYesYesYesYesLow voltage halogen with electronic transformerLED fixtureNo. of switch Resistive load(Incandescent/High voltagehalogen lamp)Capacitive load(e.g. LED, CFL)Inductive load(e.g. exhaustfan)1 600W 400VA250VA200VA120VA100VA80VA2 500W3 500W4 300W 150VA150VA100VA80VA60VA60VA5 300W6 200W*Subject to the load’s electrical characteristics, the load may require the inclusion of a load correction capacitor given in the product cartonModel No. Input (V)/(Hz) Dimension L x W x H (mm) WirelessBluetooth Mesh TechnologySTS600BTAM 240/50 9*/600W Blue 42 x 24 x 24ColourMin / Max loadsMASTERSAL products are designed in accordance with all mandatory International and Australian Standards, which require installation in accordance with AS/NZS3000by a qualified installer and regular cleaning and maintenance of the equipment. Products are sold in accordance with the following instructions and SALstandard terms and conditions of sale, available via www.sal.net.au. |
Related manuals for SAL PIXIE STS600BTAM
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine