Safety Systems LTCMIP183 Quick Installation Manual
  |
Covert Network CameraQuick Installation Guide12687ALARMRS232RXD TXD GND IN1 1B 1ALAN(PoE)DC 12VRESETSDVIN1AUDIOOUTAUDIOIN9 10 1112 13 141516 171812345ALARMRS232RXD TXD GND IN1 1B 1ALAN(PoE)DC 12VRESETSDVIN1AUDIOOUTAUDIOIN9 10 1112 13 141516 1718Covert Camera with Cylindrical SensorCovert Camera with Fixed Focal UnitCovert Camera with Block-shaped SensorInstallation of Main Unit1. Fix the standard mounting rail on the mounting surface.2. Hang the hook which is on upper-side of the main unit onto therail, press a little harder on the lower part of the main unit, andthen the elastic clasp will be automatically buckled.As shown inbelow left figure.If you already had a standard rail to be installed, you can bucklethe main unit onto the installed rail directly.As shown in belowright figure.Installation of Block-Shaped Sensor Unit1. Drill on the mounting surface.As shown in below leftfigure.2. Remove a side of the adhesive tape on the bracket. Paste thebracket on the mounting surface with aligning with the drillinghole.As shown in below right figure.3. Install the Block-shaped sensor unit into the bracket and make itto be buckled.4. Tighten the fastening screw on the top of the bracket.No. Description No. Description1 Main Unit 11 PoE & Network2 Power Indicator LED 12 Mounting Rail3 Status Indicator LED 13 Block-Shaped Sensor Unit4 Link Indicator Led 14 Decorative Cover5 Audio Interface 15 Straight Mounting Bracket6 RJ-12 Cable 16 Cylindrical Sensor Unit7 Micro SD Card Slot 17 RJ-12 Interface8 RESET Button 18 Round Rail Mounting Bracket9 RS-232 &Alarm Interface 19 Fixed Focal Camera10 Power Interface 20 Ceiling Mounting BracketNote:Press RESET button about 10s when the camera is powering on orrebooting to restore the default settings, including the user name,password, IP address, port No., etc. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine