Safety Xpress FDBOL800PAD Product Information & Installation Manual

Safety Xpress FDBOL800PAD Product Information & Installation Manual Manual pdf 1 page image

www.safetyxpress.com.auPRODUCT INFORMATION &INSTALLATION GUIDE1300 049 246SpecificationsSKU FDBOL800PADMaterial Galvanised SteelColour Powder Coated Yellow withClass 1 Red Reflective TapeDimensions:Height: 800mm (upright)80mm (folded down)Column: 150mm x 50mmItem Weight 11kgPad Lock 1 x Padlock with 2 Keys IncludedStickersOptions, at costSticker Text Option:NO PARKING, RESERVED, VISITORFixingsFREE fixings 4pcs x M10 CoachScrews 100mm, washers and plugs.Concret screws (at cost)M10 60mm OR M10 100mmFold Down Parking ProtectorBollard 800mm - with PadlockInstallation:1. Read instruction steps from beginning to end.2. Determine exactly where the bollard will be placed. Ifyou are installing more than one bollard, it is a good ideato mark the ground to ensure that you have a straight lineto assist you with the correct placement of your bollards.3. Using your hammer drill, drill a guide hole in the surface,through each hole in the bollard using the drill bit. (This isto mark the surface so that you know where to continue todrill).4.Remove the bollard and brush or vacuum away the dust.5. Continue to drill each guide hole to almost the entirelength of your fixings.6. If you are using a plastic plug component, put it in thedrilled hole and hammer in.7. Place the bollard over the holes, line up and place yourfixing in the holes and screw or hammer in.8. Use your socket to tighten the screw if applicable. Becareful not to overtighten.Tools Required:• Hammer drill with 14mm drill bit for M10coach screw 100mm, or 10mm drill bit forM10 concrete screw anchors• Fixing kit (M10 coach screws 100mm,or 60mm M10 concrete screw anchors, or100mm M10 concrete screw anchors)• The correct sized socket• A hammer• A hand broom or industrial vacuumFREEFixingsReflective22MONTHSMONTHSProduct Features:SafetyXpress Parking Spot Protector will stop anycarpark pincher attempting to park in your spot.This unit stands at 800mm high and folds flat to alow lying 80mm to ensure your car won’t scrape itwhen it’s not standing guard.The Parking Protector Fold Down Bollard is easilylocked in the upright position using the 2 keyssupplied with the unit.Powder coated in Safety Yellow means it’s visibilityyou can’t miss, and we even put a reflective striparound it so you can spot it even better at night.

/ 2

Related manuals for Safety Xpress FDBOL800PAD