What’s in the box?What do I need to fit it?How to install the VHF flush mountINSTALLATION GUIDESAILOR 6210 VHFUSER & INSTALLATION MANUALSAILOR 6210 VHFU-MountingBracketTransceiver GasketFlush MountBracket (2 pcs.)Sun ScreenPower CableFuse6.3x3.2mm (10AT)User & InstallationManualHandmicrophoneCradleWheel Knob(2 pcs.)Screw M4x45TORX 20 (5 pcs.)Square NutM4x7x2.2 (5 pcs.)Screw M4x12TORX 20 (3 pcs.)Screw ø3.9x19TORX 20 (3 pcs.)Screw M4x12TORX 20 (5 pcs.)Screw ø3.9x19TORX 20 (5 pcs.)A AB B99-130248Gasket Flush Mount Bracket (2 pcs.)Screw M4x45 TORX 20 (4 pcs.)Connect to LOUD HAILER(RED isolation on inner connector)Connect to EXT. SPEAKER(WHITE isolation on inner connector)Connect to POWER +(RED wire)Connect to POWER -(BLUE wire)Square Nut M4x7x2.2 (4 pcs.)Max wall thickness 26mmPower Drill Jigsaw ScrewdriverTORX 20Drill for M4 orØ3.9 self-tappingNotNotNotNotNote!e!e!e!e!- Firmly tie back and secure any wires not used in order toavoid possibility for mutual shorting or shorting to ground!- To ensure waterproof sealing:If the surface isn’t plane and/or rigid remove the gasket andseal with silicone sealant between the VHF and the surface.Very important information!Do not remove the membrane.If you remove the membrane the radio will not be waterproof.Membrane