1 of 10 20/12/2006 08:47Maintaining your controller settingsYour Saitek X52 Pro Flight Control System (FCS) is supplied ready for use. However, we want you to use it in theway that suits you best. We've therefore included the facility for you to change various settings on your stick andthrottle units. You can, for example, vary the brightness of the LED buttons, check your stick is working correctly orchange the way the date is displayed on your Multi-Functional Display (MFD).You change your controller settings in the Saitek X52 Pro Flight Stick properties window. There are two ways youcan open this window. Either:Double-click on the Game Controllers icon in the Control Panel and then click Properties in the GameControllers window that is displayed. Or,If the SST programming software has been installed, right-click on the Saitek X52 Pro Flight Stick profilericon in your task bar and select Control Panel from the popup list of options displayed.The Saitek X52 Pro Flight Stick properties window consists of five separate tabs. You can view and changevarious controller settings in each tab. The settings you can change are described in the following sections.Testing your controllerYou can make sure that the various features of your controller are working correctly. You do this in the Test tab ofthe Saitek X52 Pro Flight Stick properties window.To test your controllers, follow the steps below:Click the Test tab.The controller features that you can test are displayed right.1.Test each feature as required.2.