WEARABLEUser ManualWS-2334Thank you for purchasing the Sami wearable WS-2334. Read the instructions carefully to obtain optimum results and preserve it for futurereference. Sami has developed wearable devices since 2015 and we use the best components possible for the product.DESCRIPTION OF THE WEARABLECONTENTSWearable, USB Magnetic cable, instruction manual.CHARGINGConnect the device to a computer or laptop with the USB Magnetic cable for charging. Put in contact the magnetic end of the usb cablewith the charging points positioned in the back of your device. Kindly use only the USB cable included with the wearable. If you use apower adapter for charging, the output of the power adapter should be 5V, 1A. Charging time: 2 hours. Please charge the device fullybefore using it. Take care of the magnet side of the cable, if connect to AC and you have contact with a metal surface, you maydamage the charging cable.HOW TO POWER ON / POWER OFF?1) To turn ON the smart band, on the screen, long press the touch button (fixed-point touch control) for a few seconds. The touchbutton is situated on the bottom of the screen.2) To turn OFF the smart band, press the touch button until you get in the MORE menu, then long press the touch button to enter.Tap again the touch button until the Power Off icon displays in the screen( ) , long press the touch button for a few seconds andthe device will turn off.HOW TO CONTROL?On the display screen , short press the touch button to change between the different menus. Long press the touch button to achieve thedifferent functions.RIGHT UPPER ANGLEDISPLAY SCREENFIXED-POINT TOUCH CONTROLLEFT LOWER ANGLE CHARGING POINTSHEALTH SENSORCHARGINGPONTS