PROPRODUCT SPECIFICATION SHEETMICROPHONESPRODUCT DESCRIPTIONCM15P / CM20P GOOSENECK PODIUM MICSERIES CATEGORYINSTALLATION MICS CONDENSOR MICSGENERAL DESCRIPTIONThe CM15P and CM20P miniature gooseneckmicrophones are 15" and 20" in overall lengthrespectively, and the goosenecks are flexible at thetop and bottom with a mid-section stiffener for astraight profile. They feature a permanently chargedcondenser element with a Cardioid (uni-directional)pick-up pattern, providing good off axis responsewhile maintaining high feedback rejection. TheCM15P and CM20P microphones are fitted with astandard 3-pin male XLR connector at their base foreasy installation on standard female XLR connectorsor cables. An onboard High-pass filter, at 100Hz, isincluded, allowing the low frequency response to beattenuated which helps remove background noise,stage rumble and mechanical noise, which cansometimes be transmitted by the speaker at a podium.The microphones operate on a standard 9 through52 volt phantom power supply. Each microphoneincludes a standard and shock-mounted flange for easyinstallation. A dual-stage, rippled windscreen is alsoprovided to greatly reduce annoying P-popping. Themicrophone elements are protected by rugged metalhousings and the entire microphone is finished in a lowreflectance, matte black finish.FEATURES> CM20P: 20" overall length; CM15P: 15" overall length> Flexible gooseneck top and bottom, rigid mid-section> Internal selectable Hi-pass filter> Standard XLR connector> FMS1 Standard Flange-mount & SMS1 Shock-mount included> WS15 Multistage windscreen included> 9 – 52 Volt Phantom Power OperationARCHITECT’S & ENGINEER’S SPECIFICATIONSThe Samson CM15P shall be a podium microphone. It will beavailable in black. It shall be 15 inches long and be flexibleat top and bottom. It shall be a cardiod pattern condensermicrophone element type and require between 9 and 52 voltphantom powering. The CM15P shall plug into an includedflange mount for mounting to a podium.The Samson CM20P shall be a podium microphone. It will beavailable in black. It shall be 20 inches long and be flexibleat top and bottom. It shall be a cardiod pattern condensermicrophone element type and require between 9 and 52 voltphantom powering. The CM20P shall plug into an includedflange mount for mounting to a podium.CM20P / CM15P SPECIFICATIONSElement Type ................................... Fixed-charge condenserPolar Pattern ................................... Cardioid (Uni-directional)Frequency response ......................... 60 - 16000HzSensitivity ....................................... -40dBV/PaRated impedance ............................. 600 ohmsMax. SPL......................................... 127dBDynamic range ................................. 103dBS/N ratio ......................................... 70dBPower Supply................................... 9~52V phantom supplyPower consumption .......................... 4mATYPE:GOOSENECK/BOUNDARY/CHOIR©2006 Samson v1.0 5/06