Step 2. Insert the batteryInsert the battery, making sure the goldcontacts line up. Press down gently to secure.Step 3. Replace the back coverReplace the cover over the back of the phone,and then press down along the edges tosecure.Para la versión en español, visiteverizonwireless.com/supportMeet yourphone.About your phone About your phoneYour phone already has a SIM card installed.Step 1. Remove the back coverLocate the cover release slot and carefully pullthe cover off.Optional: Insert the microSD card.If you have a microSD card, slide the microSDcard into the microSD card slot with the goldcontacts facing down.NOTE: Devices and software are constantly evolving—the screen images and icons you see here are forreference only.NOTE: The microSD card is sold separately.Step 4. Charge your phoneBefore turning on your phone, charge it fully.Insert the small end of the USB cable into thephone. Insert the larger end into the chargerand plug it into an outlet.WARNING: Only use approved chargers with yourdevice. Incompatible chargers or tampering with thecharger port could damage your device and void thewarranty.USB/Charger PortRear Camera SpeakerFlashVolumeRecentAppsHomeBackPower/LockButtonHeadset JackFrontCameraSetting up your phone