Samsung S-Plasma Installation Manual
  |
Safety precautionThis installation manual explains how to install the S-plasma ion kit to a indoorunit.Please read the installation manual carefully before installing the S-plasmaion Kit. (Please refer to the corresponding installation manual for any optionalproduct installation.)WARNINGHazards or unsafe practices that may result in severe personal injury ordeath.CAUTIONHazards or unsafe practices that may result in minor personal injury orproperty damage.Warning• Contact a qualified installer or a service center for the installation.• Do not attempt to repair, disassemble, or modify the appliance yourself.– Failure to do so may result in product malfunction, electric shock, orfire. So when repairing the product, contact a qualified installer or aservice center.• When detaching or disposing of an S-Plasma ion kit, contact a qualifiedinstaller or a service center.• Install an S-Plasma ion kit securely in a designated place, using theinstallation accessories.– If the S-Plasma ion kit is not installed securely, the component mightfall off get damaged.• Do not touch the pin of an S-Plasma ion kit with hands nor insert foreignmatter.– Failure to do so may result in product malfunction or electric shock.S-plasma ion kit installationAccessoriesName S-plasma ionassembly Tape InstallationmanualConnectingcableQuantity 1 1 1 1ShapeCaution• When installing an S-Plasma ion kit, you must use the specifiedcomponents.Installing the S-plasma ion kit into the 4-way cassette indoor unitCaution• S-Plasma ion kit should be placed into position before the panelinstallation.1 Push the S-Plasma ion kit into the designated place on the discharge partuntil you hear click sound.Note• The appearance of the indoor unit may be different from thepicture depending on the model.2 Position the connection cable through the groove and connect itsconnector.CN45ABCA Insert the connection cable completely into the groove.B Put the connection cable into the groove and fix it with tape.C Push the connecting cable of the S-plasma ion kit into the cable duct.Caution• Fix the connection cable closely so that the connection cable doesnot rise up.• Connector should be connected after S-Plasma ion kit installationis completed.3 Set the operating options for the S-plasma ion kit by using the wirelessremote control. (For more information, see Setting the operating optionsfor the S-plasma ion kit.)Installing the S-plasma ion kit into the 360 cassette indoor unitCaution• Ensure to finish the S-plasma ion kit installation before installing thepanel.1 Remove the screw securing the cover.2 Insert your fingers into the two holes with PULL printed on the cover,squeeze the hook gently, and then lift up the top cover to remove it.Note• When reassembling the cover, match the latches with PULLprinted on the cover, and then push HOOK until it is firmlyassembled.3 Remove the three screws securing the cover.4 Insert a flat-blade screw driver into five joints and the tilt it to thedirections as shown in the figure one at a time.21Caution• Excessive force may damage the product.S-plasma ion kit installation manual (MSD-CAN1) DB98-33566A-05360_AC_Virus Doctor_ENG.indd 1 2016-12-19 오후 4:15:1 |
Related manuals for Samsung S-Plasma
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine