Sandstrom S1MDABI11E Quick Start Manual

Also see for S1MDABI11E: Instruction manual

Sandstrom S1MDABI11E Quick Start Manual Manual pdf 1 page image

1 Unpacking 4 Connections2 Battery Installation for the Remote Control3 Attaching Speaker Covers6 Setting the Clock5 First Time Turning the Unit OnIf the unit is connected to the mains power and then switched on fromstandby for the first time, the unit will automatically enter into the DABmode and perform auto scan function. During the scan the display willshow “Searching…” together with a slide bar that indicates the progressof the scan and the amount of stations that have been found so far.Once the scan has finished, the unit will select the first alphanumericallyfound station. To explore the found stations, tap the icons on theunit or press the buttons on the remote control.Selecting Modes• Tap the CD/iPod/USB/CARD icon on the unit or press theCD/iPod/USB/CARD button on the remote control repeatedly toswitch between CD, iPod, USB and CARD modes.• Tap the DAB/FM/AUX icon on the unit or press the DAB/FM/AUXbutton on the remote control repeatedly to switch between DAB, FMand AUX modes.The Main Unit Speakers x 2 Speaker covers x 2Instruction Manual Quick Start GuideRemove all packaging from the unit. Retain the packaging.If you dispose of it please do so according to any local regulations.Micro Hi Fi System with DAB+ Radio andDocking for iPhone/iPodGBThank you for purchasing your newSandstr Øm Micro Hi-Fi System with DAB+Radio and Docking for iPhone/iPod.Please follow this quick start guide for asuccessful first time set up.We recommend that you spend sometime reading the instruction manual inorder to fully understand all the opera-tional features it offers.Read all the safety instructions carefullybefore use and keep the instructionmanual for future reference.(iPhone/iPod not included)S1MDABI11E1. Press and slide the back cover toopen the battery compartment ofthe remote control.2. Insert two AAA size batteries (notincluded).3. Close the battery compartmentcover.Auto Setting the ClockWhen you first turn on your radio it will automatically set the time bysearching out the DAB signal. It will continue to search for the clock whilstin DAB mode until it has managed to set the time. If after 10 minutes theclock has not automatically set itself try repositioning the radio to get abetter reception.Manual Setting the ClockWhen you first connect the unit to the mains socket. The unit will be inSTANDBY mode, and the display will show “— : —”.1. During standby mode, tap and hold the ID3/MEM/C-ADj. icon on the unitor press the ID3/MEM/C-ADj. button on the remote control until thehour digits flash on the display.2. Tap the icons on the unit or press the buttons on theremote control to adjust the hour digits, and then tap theID3/MEM/C-ADj. icon on the unit or press the ID3/MEM/C-ADj. buttonon the remote control to confirm. The minute digits will flash on thedisplay.3. Tap the icons on the unit or press the buttons on theremote control to adjust the minute digits, and then tap theID3/MEM/C-ADj. icon on the unit or press the ID3/MEM/C-ADj. buttonon the remote control to confirm. The clock setting is now complete.Install the batteries correctly by following the polarity (+ and -) indications in thebattery compartment.You will find that there are many exciting features available.To get to know all these features, please take some time to read theinstruction manual provided.Tip:(P.N.: 227-8081LF-123)Quick Start GuideRemote ControlConnectingto the MainsSupplySpeaker ConnectionsConnect the speaker cables at the rear of the speakers to the speakersockets / at the rear side of the unit.11Connecting to the Mains SocketConnect the mains cable at the rear of the main unit to the mainssocket.22Switching the Unit into Standby ModeSwitch the POWER ON/OFF switch at the rear of the main unit to the“ON” position.33Switching the Unit ONPress the STANDBY/ON button to switch the unit on.441 2

/ 3

Related manuals for Sandstrom S1MDABI11E