Santec 3465HO Installation Instructions Manual

Santec 3465HO Installation Instructions Manual Manual pdf 1 page image

Installation InstructionPaper HolderPlease read the instructions completely before beginning the installation.Paper HolderRev 06/2016INSTALLATION INSTRUCTIONSThe measurements shown are for reference only. Products and specifications shown are subject to change without notice.www.santecfaucet.com | P: 310.542.0063 F: 310.542.56811/4WOODEN SURFACEDRY WALL SURFACE1- Take the trim parts off the box.Place the trim parts against the assigned wall location.Make sure that the roller is leveled and the roller post positions are correct.Leave 5’ to 5-1/4” space between the roller posts for the rollers.Mark the roller post flange positions and remove the trims.2- Using the mounting hardware post as reference, mark the screw hole positionsin the center of the post flange mark on the wall.2a- INSTALLING ON WOODEN SURFACE- For wooden surface, the mounting hardware posts can be secured byscrewing the screws directly into the wall.2b- IF INSTALLING ON A DRYWALL- Using a drill, pre-drill holes for the toggles.- Fold the toggle’s leg and insert it into the wall.- The mounting hardware posts can be secured by screwing the screwsinto the toggles.

/ 2

Related manuals for Santec 3465HO