Sanyo HT32744 Quick And Easy Setup

Also see for HT32744: Owner's manual Service manual

Sanyo HT32744 Quick And Easy Setup Manual pdf 1 page image

FirstPlease connect all signalsand antennas to jacks andthe terminals on the back.Then press the Channel UP key.BEGIN CHANNEL SEARCHNote: Before beginning channel search, pointyour antennas toward the transmittingtower(s). For tower information youcan log onto www.antennaweb.org,type in your zip code and get a listingof the tower coordinates in your area.The channel search process may takeseveral minutes. Please be patient.1. Press POWER.2. Press CHANNEL UP to start ChannelSearch.ASQuik ‘N Easy SetupDIGITALANTENNA INUHF/VHF/CATVPICTURE SHAPEADDING NEW DIGITAL CHANNELS TO THE DATABASEMoveMove SelectSelect BackBack ExitExitENTERENTER MENUMENU EXITEXITcccc Channel SearchChannel SearchDigital Cable SearchDigital Cable SearchDigital Add-on SearchDigital Add-on SearchChannel Scan MemoryChannel Scan MemoryInitial ChannelInitial ChannelAntenna SelectionAntenna SelectionChannelChannelSeveral factors affect picture shape.Such as, the aspect ratio of thebroadcast image, the aspect ratio ofthe original program material, andthe aspect ratio of the display screen.Identifying Picture ShapesLetter Box—This term is used todescribe a 16:9 ratio image dis-played on a 4:3 aspect ratio screen.Pillar Box—This shape resultswhen 4:3 aspect ratio material is dis-played on a 16:9 aspect ratio screen.Postage Stamp—This conditionoccurs when an original 4:3 aspectratio program is broadcast as a16:9 aspect ratio program, thendisplayed on a 4:3 aspect ratioscreen. This causes the image todisplay in the center of the screenwith a black border.The PIX SHAPE key can be usedto Zoom the center of the image tofill the screen. (The sides of a nor-mal 16:9 image will be cut off.)Use the PIX SHAPE key to adjustthe image size or shape to suit yourpersonal preferences. Not all shapeswill be available for all broadcasts.Options will vary by model, due toaspect ratio differences.Normal is the term used to describeprogramming that is broadcast inits original aspect ratio (4:3 or16:9) and displayed on a screenwith the same aspect ratio as theoriginal program material.DIGITAL ANTENNA INYour TV can receive and display ANY resolutionbeing broadcast. The signal makes the difference.Note: 480i / 480p / 720p / 1080i Resolutions—Depends on broadcasting stations andcontent providers. Press the INFO key todetermine the resolution being received.UHF/VHF/CATV INConnect an Antenna, Analog Cable, orSatellite Receiver to this terminal.Note: The only resolution available from anyof these connections is 480i.DIGITAL ADD-ON SEARCHUse this feature to add new digital channels orto add digital channels who’s broadcast towersare in opposite directions from your location.If necessary, after the initial search, turn theantenna and use the On-Screen Menu to per-form a Digital Add-on Search. Repeat thesesteps for each direction in which there are trans-mitting towers.A Digital Add-on Search may take several min-utes to complete.1. Select a digital channel (digital channelshave a “D” prefix, such as, D03).2. Press MENU.3. Use the CURSOR keys to highlight theAntenna icon.4. Press ENTER.5. Use the Up/Down CURSOR keys to high-light Digital Add-on Search.6. Press ENTER.7. Use the Down CURSOR key to choose Yes.8. Press ENTER to begin searching for newdigital channels.Call Us, We Can Help!1-800-877-5032www.sanyotv.comPart Number: 1JC6P1P0184--SEARCH FORCHANNELS2nd1stCONNECT SIGNALS TO THE TELEVISION

/ 2

Related manuals for Sanyo HT32744