All fasteners subjectto metric dimensionof International Orga-nization for Standardi-zation. .Portable Cassette RecorderMODELMR-410SERVICE MANUALSANYO ELECTRIC CO., LTD.INTERNATIONAL DIVISION : SANYO ELECTRIC TRADING CO., LTD.OSAKA, JAPAN‘SPECIFICATIONSRecording system AC bias, double track Frequency response 50 to 10,000 Hz .Erasing system DC erase Transistors | 25B303 x I 2SB187 x 1Tape speed 1-7/8 ips. (4.8 cm/sec.) 2SB186 x 1 2SB405 x 2Recording (playback) 2SB185 x 1 ,time 1 hour (C-60) Diodes 1S188 x 1 181849 x 2Rewind and fast Thermistor SDT-06 x 1forward time 1’ 45” (C-60) Speaker 4” (10 cm) P. D. S. 8QOutput power 1.5W max. Power source AC; 120/200/240 V, 50/60Hz multivoltageWow and flutter 0.3% RMS DC; 6V, “C’’-size (UM-2) batt. x 4Signal to noise ratio 40dB Dimensions 6-7/16”(W) x 2-13/16 “(L) x 6-3/16"(HTerminals MIC. 10KQ Weight 4.8 lbs.AUXIN 270KQ Accessories Microphone, audition cassette, AC cordEXT SP 82DISASSEMBLEY INSTRUCTION——To remove the amplifier and mechanism from the cabinet:1. Pull out the Tone and Volume control knobs.2. Place the recorder front side down and remove the screw fromthe center of the cabinet back.CABINET BACKPUSH STRAIGHTJf , AND LIFT UP3. Depressing the cabinet bottom with both thumbs, open’ theFOR CABINET BACKREMOVAL FIRST TAKE OFFTHIS SCREWback cabinet. See Fig. 1 below.ll- PUSH STRAIGHTAND. LIFT UPCABINET FRONTFig 1.