TDK-Lambda CUS200LD Installation Manual

TDK-Lambda CUS200LD Installation Manual Manual pdf 1 page image

Page 1 of 12 CA850-04-01A (a)CUS200LD Installation ManualENGLISHGeneral Safety Instructions:READ SAFETY INSTRUCTIONSServicing:These products are not customer serviceable TDK-Lambda UK LTD and their authorised agents only are permittedto carry out repairs.Critical Components:These products are not authorised for use as critical components in nuclear control systems, life support systems orequipment for use in hazardous environments without the express written approval of the Managing Director of TDK-Lambda EMEA.Product Usage:These products are designed for use within a host equipment which restricts access to authorised competentpersonnel.This product is a component power supply and is only to be installed by qualified persons within other equipment andmust be not operated as a stand alone product.This product is for sale to business to business customers and can be obtained via distribution channels.It is not intended for sale to end users.This product is a component power supply and does not fall within the scope of the EMC directive. Compliance withthe EMC directive must be considered in the final installation. Please contact your local TDK-Lambda office.Environmental:These products are IPX0, and therefore chemicals/solvents, cleaning agents and other liquids must not be used.Environment:This power supply is a switch mode power supply for use in applications within a Pollution Degree 2, overvoltagecategory II environment. Material Group IIIb PCB’s are used within it.Output Loading:The output power taken from the power supply must not exceed the rating stated on the power supply label, exceptas stated in the product limitations in this handbook.Input Parameters:This product must be operated within the input parameters stated in the product limitations in this handbook.End of Life Disposal:The unit contains components that require special disposal. Make sure that the unit is properly disposed of at theend of its service life and in accordance with local regulations.RISK OF ELECTRIC SHOCKHigh Voltage Warning:Dangerous voltages are present within the power supply. The professional installer must protect service personnelfrom inadvertent contact with these dangerous voltages in the end equipment.WARNING: When installed in a Class 1 end equipment, this product must be reliably earthed and professionallyinstalled.The (+) or (-) output(s) can be earthed or left floating.The unit cover(s)/chassis (where applicable) must not be made user accessible.The mains input connector is not acceptable for use as field wiring terminals.