TDR Eco Pro Manual
Also see for Eco Pro: User guide
Initial SetupAttaching the bottle holderInstalling the polish and waterRemoving the polish nozzle capsContentsInstalling the chipPowering up the machineSetting up your machineLocating the machinePlease keep packaging in case the machine needs tobe returned at any point.1. Open box and lift out machine 2. Carefully remove contentsThe contents of the box is listed on the back of thissheet. Please check to make sure that the contentsare complete. If you have any queries with thecontent please contact Technical Support, Monday toFriday, 9am to 5pm on:Your Eco Pro is designed so that you can set it upquickly and start using it right away. Here arethe key tasks to complete before you turn on yourmachine:Place the machine on asturdy, flat surface neara power socket.Start by removing the thumbscrew on the back of themachine. Locate the two hooks on the bottle holderinto the slots on the back of the machine, slide thebottle holder to the left and then use the thumbscrewto secure the bottle holder in place.1. Remove the caps from the two bottles and store.2. Hang the polish bottle on to the left slot on thebottle holder (looking at it from the back).3. Hang the water solution bottle on to the right sloton the bottle holder.4. The cap with the green text attaches to the polishbottle, but you must remove the small blackrubber cap from the pipe first.5. The cap with the blue text attaches to the watersolution bottle.5. Ensure that the tubes reach the bottom of bothbottles.There are two more black rubber caps on the polishnozzles, inside the machine, that must be removedbefore using the machine. It is not necessary tokeep these as they are only designed to prevent thepolish from drying out in storageLocate the chip cardand install as shownhereOnce you have set up your machine you are readyto repair your first disc. Plug the machine into agrounded power outlet and switch on the mainssocket switch. Then switch the machine on using thered power switch on the front of the machine.The machine will bleep and the lid will openautomatically.Now refer to the user guide in the information packfor instructions on repairing your first disc.0800 412 5424Unpacking the machinene 2 Carefully remove contentsmachine on aat surface nearsocket.WatersolutionPolishNozzlecap 1Nozzlecap 2* The slots aredifferent sizesand cannot beconfused. |
Related manuals for TDR Eco Pro
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine