Tait TA2922 Installation Instructions Manual
        |
© Tait Electronics Limited April 2010www.taitworld.comMAI-02922-01-01TA2922 TM8000/TM9000 Universal LineInterface Board Installation InstructionsTAIT: THE RIGHT FITIntroductionThe TA2922 universal line interface board is fitted into the TM8000 and TM9000 radiosand is functionally equivalent to the AM8000-UIS manufactured by Tait Australia. It featureshardware and software-configurable options for features such as phantom DC keyingoptions, tail and anti-kerchunker timers and a flexible supply voltage monitoring alarm.Available variants are:■ 8-wire isolated line interface (TA2922-01)■ 2-wire line interface (TA2922-02)■ 6-wire line interface (TA2922-03)■ 6-wire balanced line interface with unbalanced speaker output (TA2922-04)■ 6-wire marine line interface (TA2922-05)■ 6-wire -10dBm line interface (TA2922-06)The TA2922 kits provide the following items:■ TA2922-xx PCB assembly■ 18-way micromatch loom■ D-range foam seal■ D-range hood parts■ D-range screw locks (x2)■ M3x8 taptite screws (x6)The interface board fits inside the radio in theoptions cavity and is connected to the main PCBby the internal options loom. The 9-way D-rangeconnector mounted on the interface board fitsthrough the external options connector holeprovided in the radio chassis.A configurable matrix allows the integrator toallocate any of 26 different I/O signals to any ofthe nine pins on the external 9-way D-rangesocket.Important: The radio does not meet the IP54protection standard once a TA2922 board hasbeen installed.external optionsconnectorinternal options connectorD-rangehood partsD-range pluguniversal lineinterface boarduniversal line interfaceinstallation partsinternal options loom |
Related manuals for Tait TA2922
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine