Tanita BC-1000 Manual

Also see for BC-1000: Instruction manual Instruction manual User manual

Tanita BC-1000 Manual Manual pdf 1 page image

Using TANITA Wireless Remote Tabletop DisplayInitial SettingPlease make sure the scale is within 17feet (5m) with batteries inserted.Insert batteries into the remote display.Press any front panel button to start the communication process.The wireless icon ( ) on the display will blink while the remote display communicateswith the platform. After the communication is successfully done (wireless icondisappears), continue to step 1 “Set Hour”.Note: If the communication fails, the display will show "ErrC", press any front panelbutton to restart the communication process.1. Set HourPress s/t to set hour and then press SET.The unit will beep once to confirm.2. Set MinutePress s/t to set minute and then press SET.The unit will beep twice to confirm the programming.• Resetting timePress the clock button on the bottom of the remote display.Then follow the procedure 1 and 2.Setting and storing personal data in memoryYou will receive readings only if data has been programmed into the Tanita Remote Tabletop Display.1. Select Personal Data NumberUse the SET button to activate the unit. Use s/t buttons to select a personal data number. Press SET.2.Set AgeUse s/t buttons to select age. Press SET.3.Select Female or MaleUse s/t buttons to select Female ( ) / Male ( ) / Athlete Female ( / ) / Athlete Male ( / ). Press SET.4.Specify HeightUse s/t buttons to select height. Press SET.5. Select Activity Level (Except D-1100)Use the s/t buttons to specify Activity Level. Press the SET button to confirmThe remote display will beep twice and the display will flash all data three times to confirm the programming.The power will then shut down automatically.To use the DCI (Daily Calorie Intake) feature properly, you need to set the Activity Level.Level 1 = Inactive lifestyles (little or no exercise)Level 2 = Moderately active lifestyles (occasional, low intensity exercise)Level 3 = Adult involved in intense physical activityNote: If you select the Athlete Mode, it will automatically set the Activity Level to Level 3.Switching The Weight ModeSelect your preferred weight mode using the weight mode switch on the bottom of the Remote Display.Battery CoverBacklight ButtonUpright Position

/ 3

Related manuals for Tanita BC-1000