Tascam DP-24 Owner's Manual Addendum

Also see for Digital Portastudio DP-24: Owner's manual Notice Manual Troubleshooting supplement Quick start guide

Tascam DP-24 Owner's Manual Addendum Manual pdf 1 page image

TASCAM DP-24 1DP-24 Owner's Manual addendaD01187420AList of added functionsThe following functions have been added in firmware V1.10.0 New PREFERENCE setting items• Peak hold function• Automatic power saving function0 Support for subframes in track editing0 Sampling rate converter function0 Checking the noise shaper (noise shaped dithering)0 Using the noise shaper (noise shaped dithering)New PREFERENCE setting itemsSetting items with the following functions have been addedto the PREFERENCE screen. (See the Setup (PREFERENCE)section in 11–Various Other Functions of the Owner’s Manual.)• Peak Hold function (Peak Hold)• Auto Power Save function (Auto Power Save)Peak Hold functionUse the Peak Hold function to set the peak hold indication modefor the level meters shown on, for example, the Home Screen.Use the CURSOR (5/b) buttons to select (highlight blue) thePeak Hold item, and use the JOG/DATA dial to set the holddisplay mode.The options and default value are as follows.Option FunctionOFF(default value) The peak value is not shown.1Sec The peak value is shown for about one second.KEEPThe peak value is retained and shown contin-uously. In every recorder mode other thanMastering mode, press the F3 (PEAKCLEAR) button to clear the peak value.In Mastering mode, the peak value is clearedwhen you locate.NOTE• The KEEP setting is useful for checking the maximum valuethat has occurred up until the current time when you areunable to continuously monitor the meters (for example,when you are performing while recording).• During CD playback, press the F1 (PEAK CLEAR) buttonto clear the peak value.Automatic power saving functionAn automatic power saving function has been added in V1.10to comply with the European Energy-related Products Directive(ErP). With the default automatic power saving function settingof 30 minutes, the power will turn off automatically if 30 minuteselapse without any operation or activity. Follow the instructionsbelow to change the automatic power saving function setting.Use the CURSOR (5/b) buttons to select (highlight blue) theAuto Power Save item, and use the JOG/DATA dial to setthe time until the power automatically turns off.The options and default value are as follows.Options: OFF, 3Min, 5Min, 10Min, 30Min (default value)NOTEThe Auto Power Save Function is disabled under the followingconditions.• During recording or playback• When the metronome is in use• When the record function is ON• When a signal is output from the STEREO OUTSupport for subframes in track editingOn the Home Screen, if you press the JOG PLAY button to entersearch mode, the subframe (1/10 frame) will be shown in thetime counter.When the horizontal (time) scale is maximized, you can turn theJOG dial to locate in subframe (1/10 frame) units.You can also set IN and OUT points by subframe units and edittracks with subframe precision.Sampling rate converter functionStandard audio CDs are in 16-bit, 44.1kHz format. When creatingan audio CD, sampling rate conversion will automatically convertany songs that use different settings to 16-bit, 44.1kHz. This willnot, however, change the original master files.

/ 2

Related manuals for Tascam Digital Portastudio DP-24