TASCAM Poly/Mono Converter 1X Poly/Mono ConverterD01159420APoly/Mono Converter is computer software that can be used to extractdata from each channel of a poly (interleaved) BWF file recorded by aTASCAM HS series device. That data can then be converted into monoBWF files. This software can also combine multiple mono BWF files into asingle poly BWF file.(After conversion, ordinary WAV files also become BWF files.)After conversion, these files can be imported into and edited in Pro Toolsand other DAW software. They can also be played back on TASCAM HSseries devices.Changes could be made to the contents of this document without warning.Operation environmentCompatible operating systemsi Windows XP , Windows Vista , Windows 7(*)i Mac OS X 10.6 or laterNOTE*Only 32-bit editions of Windows operating systems are supported.(64-bit editions are not supported.)Conventions used in this documentThis manual uses the following methods of showing information.0 Messages shown on a computer display are enclosed in quotationmarks. For example, "OK" .0 Additional information is provided as necessary under NOTE headings.NOTEAdditional explanations and special cases are explained in thismanner.Trademarks0 TASCAM is a trademark of TEAC Corporation, registered in the U.S. andother countries.0 Windows, Windows Vista, and Windows 7 are either registeredtrademarks or trademarks of Microsoft Corporation in the United Statesand/or other countries.0 Macintosh, Mac and Mac OS are trademarks of Apple Inc.0 Other company names and product names in this document are thetrademarks or registered trademarks of their respective owners.ContentsConventions used in this document...................................... 1Trademarks................................................................................. 1Operation environment ........................................................... 1Software License Agreement.................................................. 2Installing the software (on Windows) ................................... 3Software operation ................................................................... 5Launching the software .................................................................5Window overview ............................................................................5Mono to Poly conversion...............................................................5Poly to Mono conversion...............................................................8Notice regarding software that uses the LGPL ..................11