Tascam iXZ User Manual
Also see for iXZ: Owner's manual
XiXZMIC & GUITAR INTERFACEOWNER'S MANUALThank you for your purchase of the TASCAM iXZ Mic & Guitar Interface.Before connecting and using the unit, please take time to read thismanual thoroughly to ensure you understand how to properly set upand connect the unit, as well as the operation of its many useful andconvenient functions. After you have finished reading this manual, pleasekeep it in a safe place for future reference.You can also download this Owner’s Manual from the TEAC Global Site(http://teac-global.com/).IMPORTANT SAFETY INFORMATION• Do not use this apparatus near water.• Clean only with dry cloth.• Refer all servicing to qualified service personnel. Servicing isrequired when the apparatus has been damaged in any way, suchas powersupply cord or plug is damaged, liquid has been spilledor objects have fallen into the apparatus, the apparatus has beenexposed to rain or moisture, does not operate normally, or has beendropped.• Do not expose this apparatus to drips or splashes.• Do not place any objects filled with liquids, such as vases, on theapparatus.• Avoid installing this unit on top of any heat-generating electricaldevice such as a power amplifier.• If the unit is moved from a cold to a warm place, or used after asudden temperature change, there is a danger of condensation; vaporin the air could condense on the internal mechanism, making correctoperation impossible. To prevent this, or if this occurs, let the unit sitfor one or two hours at the new room temperature before using.ª FOR U.S.A.INFORMATION TO THE USERThis equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses, and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructionmanual, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occurin a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determinedby turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures.a) Reorient or relocate the receiving antenna.b) Increase the separation between the equipment and receiver.c) Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.d) Consult the dealer or an experienced radio/TV technician for help.CAUTIONChanges or modifications to this equipment not expressly approved byTEAC CORPORATION for compliance could void the user’s authority tooperate this equipment.THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LANORME NMB-003 DU CANADA.ª For European customersDisposal of electrical and electronic equipment(a) All electrical and electronic equipment should be disposed ofseparately from the municipal waste stream via collection facilitiesdesignated by the government or local authorities.(b) By disposing of electrical and electronic equipment correctly,you will help save valuable resources and prevent any potentialnegative effects on human health and the environment.(c) Improper disposal of waste electrical and electronic equipment canhave serious effects on the environment and human health becauseof the presence of hazardous substances in the equipment.(d) The Waste Electrical and Electronic Equipment (WEEE)symbol, which shows a wheeled bin that has beencrossed out, indicates that electrical and electronicequipment must be collected and disposed ofseparately from household waste.(e) Return and collection systems are available to endusers. For more detailed information about thedisposal of old electrical and electronic equipment,please contact your city office, waste disposal service or the shopwhere you purchased the equipment.Disposal of batteries and/or accumulators(a) Waste batteries and/or accumulators should be disposed ofseparately from the municipal waste stream via collection facilitiesdesignated by the government or local authorities.(b) By disposing of waste batteries and/or accumulators correctly,you will help save valuable resources and prevent any potentialnegative effects on human health and the environment.(c) Improper disposal of waste batteries and/or accumulators can haveserious effects on the environment and human health because ofthe presence of hazardous substances in them.(d) The WEEE symbol, which shows a wheeled bin thathas been crossed out, indicates that batteries and/or accumulators must be collected and disposed ofseparately from household waste.If a battery or accumulator contains more than thespecified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) as defined in the Battery Directive(2006/66/EC), then the chemical symbols for thoseelements will be indicated beneath the WEEE symbol.(e) Return and collection systems are available to end users. For moredetailed information about the disposal of waste batteries and/oraccumulators, please contact your city office, waste disposal serviceor the shop where you purchased them.Pb, Hg, CdSummary of this device• This device is a microphone/guitar interface for recording sound usingsoftware compatible with a microphone input by connecting an iOSor Android device*.* 4 pole terminal (CTIA) required.• This device is equipped with XLR with an internal phantom powersupply and a standard combo jack.• This device is compact and portable, and can operate with only twoalkaline or nickel hydride “AA” batteries.Items included with this productThis product includes the following items.Take care when opening the package to avoid damaging the items. Keepthe packing materials for transportation in the future.Please contact the store where you purchased this unit if any of theseitems are missing or have been damaged during transportation.• iXZ Package ............................................................................................................... x1• Owner’s Manual (this document) including warranty ............................... x1• AA alkaline batteries............................................................................................... x2Part Names Microphone Indicator 4P mini-plug cable MODE Switch Phantom Switch INPUT Volume Microphone / Guitar Input Terminal Headphone terminalUpper sideFrontsideRearside1 4P mini-plug cableA cable with 3.5mm 4P jack plug (about 160mm in length).For connecting to the headphone jack of an iOS or Android device*.Monophonic sound from this device is output to an iOS or Androiddevice, and headphone sound output from the iOS or Android deviceis input to this device.* 4 pole terminal (CTIA) required.2 Microphone IndicatorWhen converting the MODE (input) into microphone, [ ] thisIndicator starts blinking.If the Indicator becomes dim, replace the batteries with new ones.3 MODE SwitchChange according to the input.When connecting the XLR plug of a microphone, [ ] select“Microphone”.When connecting the standard plug of a guitar, [ ] select “Guitar”.When not in use, leave the switch off.4 Phantom SwitchSwitch on when a condenser microphone is connected.Provides a power supply to operate a condenser microphone.When switched on, a red mark appears on the back of the switch.When a condenser microphone is not used, leave the switch off.5 INPUT VolumeThis is for adjusting the input level of sounds from the connectedmicrophone, and will output to an iOS or Android device.6 Microphone / Guitar Input TerminalThis is combo jack for XLR and standard mono. The mono standardplug of a guitar or the XLR plug of a microphone can be connected.NoteIt is recommended to use a microphone working with under 5.0mAphantom current. When you connect line equipment to the XLRterminal, use it with the phantom power off; otherwise, the connectedequipment may be damaged.(Please note that microphones with 6.3 mm-plug cannot be used withthis terminal.)7 Headphone terminalYou can monitor the output of headphone sounds from an iOS orAndroid device by connecting to the headphone jack. |
Related manuals for Tascam iXZ
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine