Teagle Telehawk Quick Start Manual
Also see for Telehawk: Instruction book / parts listOperator's manual & parts list
    |
Telehawk Quick Start Guide page 1ACBDETELEHAWKQUICK START GUIDEATTACHING POWERCABLE AND HOSES TOTHE TELEHANDLERConnect the curly cable multi-plug intothe boom bracket socket. Connect thefeed and return hoses on the telehandlermaking sure the flow direction is correct.When you connect the junction box plugin, you should hear a “click” from themachine which tells you it has power.HOW TO GET THE BEST FROM YOUR TELEHAWK2FITTING THE CONTROL BOXIN THE CAB & BLUETOOTHThe control box is supplied with a suctioncup attachment. This should be fitted in thecab in a suitable position that is convenientto the operator on a smooth, clean dustfree surface.The control box requires a 12v supply andis shipped with a cigarette lighter plug asstandard. If the supply cable is connectedwith the wrong polarity the control box willnot switch on.Plug in the control box in the cab. Once thebluetooth light has stopped flashing and isilluminated bluetooth is paired and you areready to proceed.INITIAL STARTSet the oil flowing with the loader at low revsand the fan will instantly start to spin. Note: Tostop the fan motor, you will need to stop thehydraulic oil flow. Press the “power on” buttonwhen the bluetooth is illuminated. Checkchute rotation & deflector functions work.CROSSBEATER /BED FORWARDPress the working button to startthe crossbeater and bed chain. If thebed chain is set to ‘0’ the bed shouldbe stationary. Pressing this buttonagain will stop the bed chain andcrossbeater.Stopping the bed will not stop thefan. To do this the hydraulic flowmust be cut off.BED CHAIN SPEEDThe bed chain speed can be variedin the cab by twisting the dialindependently of the crossbeaterspeed. If the bed is rotating when thedial is set to “0”, then you need to re-calibrate the bed speed (see page 20of the manual).CROSSBEATERBED REVERSETo reverse the machine at any timepress the “crossbeater & bed chainunloading” button.SEE THE MANUAL FORMORE INFORMATIONON PAIRING THE DEVICES.CDEFITTING THETELEHAWK ONTOTHE LOADERMake sure the appropriate loaderbrackets are central and secure. Attachthe Telehawk to the loader headstockengaging the locking mechanismto prevent the machine detaching.Carefully crowd up and check there isclearance between the fan motor coverand headstock.1AB |
Related manuals for Teagle Telehawk
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine