Terex Genie GS-3232 Installation Instructions Manual

Also see for Genie GS-3232: Service and repair manual Maintenance manual Service and repair manual Service and repair manual Operator's manual

Terex Genie GS-3232 Installation Instructions Manual Manual pdf 1 page image

Dear valued customers, the firmware site has changed.To complete this bulletin, install the most current version of the software.Note: In 2014, Genie released "SmartLink Proportional Lift" control system upgrade kits for these machines.Some of these machines may have been upgraded with the Proportional Lift control system.1 Determine the "Application Firmware" installed in your machine. Turn the key switch to the ground controls or platform controls position. Pull out the red Emergency Stopbutton to the on position at both ground and platform controls. Press the ground control scroll down button. The "Application Firmware" version will be displayed at theLCD display.2-Speed Lift = 137641Proportional Lift = 12903812 Access the firmware website address below:Link to Firmware site https://www.genielift.com/en/support/firmware3 From the drop-down menu, select the model that is appropriate for your machine.4 Locate and download the appropriate firmware/software file for your machine.If you need assistance, contact your local Genie Product Support Team.Mandatory Action Required