PAGE 1 OF 6 1222 IH-10415H-10415GLASS DRY ERASEPARTITION1-800-295-5510uline.comPARTSASSEMBLYTOOL NEEDEDTwo Person AssemblyRequiredWARNING! Glass dry erase boards are madeof safety glass, but improper handling andinstallation may cause serious injury if theboard shatters. Proper installation will require atleast two people.1. Lay board on its side with second person holding itin place.2. Align base perpendicular to board and ensure thatholes on base align with holes on board. Insert twoflange bolts and tighten using wrench. (See Figure 1)3. Repeat step 2 with remaining base and flange boltson opposite side of board.4. Return partition to a standing position.Wrench(included)Glass Board x 1Base x 2 Double-Sided Tapex 4Flange Bolt x 4 Caddy x 1Figure 1Para Español, vea páginas 3-4.Pour le français, consulter les pages 5-6.