U-Line H-1101 Instructions Manual

U-Line H-1101 Instructions Manual Manual pdf 1 page image

PAGE 1 OF 3 0816 IH-1101π H-1101DELUXE PALLETTRUCK SCALE1-800-295-5510uline.comINSTRUCTIONSOPERATION1. ON/OFF. Press and hold 1 second to turn scale onand off. Scale runs a self-test, then displays theproduct ID (left number) and software version (rightnumber.)2. NUMBER KEYS. Use these keys to enter numbers. Alsoused for other functions as labeled.3. ENTER. Press after keying a number.4. CLEAR. Press to clear the number in the display.5. ZERO. Press ZERO to reset the display to zero with orwithout a weight on the load cell.• Nothing on the load cell – Resets the display to zero.• Weight on the load cell – Resets the display tozero, in effect canceling the weight of that item.Useful for canceling the weight of the empty box orcontainer that will hold the items you want to weigh.Display shows a negative number if you remove thecontainer, until you re-zero the scale.• AZT (Auto Zero Tracking) – Corrects slight zerochanges during normal operation. If small weightsare added while display is at or near zero, the scalemay zero them off.6. NET/GROSS. Switches display readout between netweight and gross weight. Indicator on left side ofdisplay shows whether gross or net weight is beingdisplayed.NET = GROSS – TARE• Weight is always "NET" when in "UNITS/PIECES."• "E-2" Error displays if NET/GROSS key is pressed whena total is set. Clear the current total before switchingbetween NET/GROSS.7. TARE. Set the weight of an empty container, so youcan cancel that weight from the total of itemsbeing weighed.• Place empty container on scale. Press TARE. Weightof container is now entered in memory. Whenweighing container with contents, pressing TARE willcancel the weight of the container from the total.Display will show the net weight.• To clear tare, press TARE and CLEAR keyssimultaneously.8. Tare does not function in UNIT/PIECES mode.9. PRESET TARE. If the weight of a container is known, setthat weight in the memory manually.• Press PRESET TARE, then key in the weight you want toset.• To clear, press TARE and CLEAR keys at the sametime.10. UNITS/PIECES. Switches display readout between "lb"and "kg" (kilograms) and "PCS" (pieces, quantity ofitems.) Indicators are on left side of display.11. SAMPLE. Displays weight of individual pieces.• Place 3-5% of the total number of items beingweighed on the scale. Press SAMPLE. Use the numberkeys to enter the number of items on the scale. Thesample measurement is saved in memory. The scalewill switch to the unit "PCS" and display the numberof pieces on the scale.• To clear the sample memory, press the SAMPLE andCLEAR keys at the same time.Para Español, vea páginas 4-6.Pour le français, consulter les pages 7-9.