0814 IH-2901PAGE 1 OF 3SliDinG StORAGEShElvESπ1-800-295-5510uline.comH-2901, H-2902, H-2903H-2904, H-2905, H-2906H-2907, H-2908ShElvinG Unit1. Make sure post is positioned as shown. (See Figure 1)2. Use a rubber mallet to tap levelers into posts.(See Figure 1)3. Unscrew and remove the bolts from the levelers.4. Start with the lowest shelf. Snap the interlockingpieces of a shelf support (wide end down) aroundthe post at the lowest groove where shelf is to belocated. Slide the support up or down until it snapsinto the groove. Add a shelf support to the sameplace on the remaining posts. (See Figure 2)NOTE: NSF requires food service applications tokeep the lowest shelf at least 6" above the floor.End track x 4 Stop x 4Adjustable Pin x 6-10Bolt x 8 Allen Key x 1Roller Assembly x 6-10Middle track x 2-6in addition to the posts, shelves, levelers and shelf supports from theAdjustable Open Wire Shelving, this kit includes the following:03040506070809Figure 1Figure 2PARTSASSEMBLY