U-Line H-3736 Installation Instructions Manual
Also see for H-3736: Installation instructions
  |
PAGE 1 OF 21018 IH-3736CROWD CONTROLBARRIER POSTS WITHRETRACTABLE BELTπ 1-800-295-5510uline.comH-3736, H-4206, H-5097H-6417, H-6454, H-7079H-7080BELT CASSETTE REPLACEMENT INSTRUCTIONSTOOL NEEDEDPhillips Screwdriver1. Loosen the four bottom screws securing the cassetteinto the post. (See Figure 1)2. Slide the cassette out of the post. (See Figure 2)3. Loosen the lower screws slightly on the replacementcassette, but do not remove them completely.(See Figure 3)WARNING! Do not loosen the top screws.This will break cassette.4. Fit the replacement cassette into the slots in the topof the post. (See Figure 4)5. Slide the cassette all the way down the post slots.(See Figure 5)6. Tighten screws securing the cassette into the post.(See Figure 6)NOTE: Do not overtighten, as this may affectthe belt retraction.Figure 1 Figure 4Figure 5Figure 3Figure 2Figure 6 |
Related manuals for U-Line H-3736
U-Line H-3736 Installation Instructions Manual
U-Line H-6482 Installation Instructions Manual
U-Line H-242 Instructions Manual
U-Line H-1843 Instructions Manual
U-Line S-9737 Instructions Manual
U-Line H-623 Operating Instructions Manual
U-Line H-9975 Assembly Instructions Manual
U-Line H-3797 Manual
U-Line H-2035 Installation And Setup
U-Line H-3343 Manual
manualsdatabase
Your AI-powered manual search engine