U-Line H-4210 Quick Start Manual
   |
PAGE 1 OF 3 0521 IH-4210H-4210FABRIC SLED BASECHAIR WITH ARMS1-800-295-5510uline.com1. Align leg mounting plates with holes on bottom ofseat cushion. Use four M8 x 20 mm screws to secureloosely. Repeat on opposite side. (See Figure 1)NOTE: Do not tighten screws until assembly iscomplete.2. Align back cushion with holes in back mountingplate. Use four M6 x 25 mm screws to secure loosely.(See Figure 2)3. Use Phillips screwdriver to fully tighten all screws.PARTSASSEMBLYPara Español, vea página 2.Pour le français, consulter les page 3.TOOL NEEDEDPhillips ScrewdriverSeat Cushion x 1 Back Cushion x 1 Leg with Armrest x 2 M8 x 20 mm Screw x 8 M6 x 25 mm Screw x 4Hardware KitFigure 1M8 x 20 mm screwFigure 2M6 x 25 mmscrew |
Related manuals for U-Line H-4210
U-Line H-4209 Quick Start Manual
U-Line H-4292 Quick Start Manual
U-Line H-4805 Quick Start Manual
U-Line H-4114 Quick Start Manual
U-Line H-4118 Quick Start Manual
U-Line H-5861 Quick Start Manual
U-Line H-3767 Quick Start Manual
U-Line H-3768 Quick Start Manual
U-Line H-2489 Quick Start Manual
U-Line H-3641 Quick Start Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine