U-Line H-4404 Manual
               |
PAGE 1 OF 15 0522 IH-4404H-4404INDUSTRIAL AUTOMATICTAPE DISPENSER1-800-295-5510uline.caNOTESFEATURES• If using automatic feed, when one piece of tape isremoved, the unit will automatically feed and cutthe next piece at the preset length.• The tape length is easily seen on the LED display,and operation is simple. Press the CM key or MM keyto set the length. (Setting limit 20mm to 999mm.)• If a piece of long tape is needed, press theADVANCE key for desired length, then press CUT keyto cut.• The blade unit can be removed and replaced easily.(Tape jamming is also easily fixed by removing theblade unit.)Do not leave the tapedispenser in direct sunlight.Do not drop the tapedispenser or subject it toheavy shocks.Do not use volatile liquids(benzine, thinner, etc.)to clean the dispenser.Wipe with dry cloth only.Do not use the tape dispenserin humid or dusty places.Do not insert bars or platesinto the tape outlet-this willdamage the blades.DO NOT insert your fingersinto the tape outlet!Para Español, vea páginas 6-10.Pour le français, consulter les pages 11-15. |
Related manuals for U-Line H-4404
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine