UBCO 2X2 WORK BIKE Manual
Also see for 2X2: User manualUser manualManualQuick start guideQuick start guide
  |
1. Remove cable tiesA Cut the cable ties that secure the kick stand(s) to the frame. Put the kickstanddown and rest the bike on the kickstand.A Cut the cable ties that secure the foot pegs to the frame.3. Align the headlightA Loosen the two upper screws thatattach the headlight clamps to thehandlebars using the 3mm Allen key.A Tilt the headlight to aim forward so thedot stickers are aligned and re-tightenthe two screws.4a. Install the power supplyA IMPORTANT: inspect the power supply; contact UBCO if there is any transit damage.A Retract the power supply lock and remove the battery strap from the frame. Carefullylower the power supply into place, with the power socket on the right-hand side ofthe bike.A Plug the bike’s power supply plug into the power socket. Use the securing key toengage the power supply lock.A Secure the battery strap as shown at the right.2. Align the handlebarsA Loosen the side bolts on the stemwith the 5mm Allen key. Straightenthe handlebar in line with the frontwheel. The stickers should line upas well.A Once aligned, re-tighten sidebolts, alternating as you tighten toprevent damage to the threads.(Fasten to 15Nm if you have aTorque wrench.)If your 2X2 has arrived in the box,here’s how to set up your new ride.Lift up the seat to find a tool kit with all the tools youneed. A pair of scissors or a knife will also be handyand a torque wrench if you have one.KIA ORAHELLO.Scan this QR code to watchour bike assembly video.If you don’t feel confidentputting your bike together,contact us for help.LeftbarPower SupplyRightbar1 324b. Secure the battery strapA Velcro side up, tuck the end of the battery strap under the left hand bar, centralto the power supply.A Carry the strap over the power supply and tuck it under the right hand bar. Feedthe strap back through the clip and centre the clip.A Tighten the strap and secure it closed.OPERATING INSTRUCTIONSSTEP 1:Turn on the 2X2Locate the key fob in theunderseat tool kit. Powerthe bike by pressing thebutton on the keyfob 1.5 seconds. Theheadlight will turn on.See the completeinstructions in the UserManual on page 16.STEP 2:Download the UBCO AppYou can download theUBCO App to control thesettings of your 2X2 and getcritical updates deliveredwirelessly. Simply search forUBCO in your phone’s appstore and download it forfree. Make sure Bluetoothis activated on your mobilephone when connecting theapp to your 2X2.STEP 3:Check power supply chargeYour power supply will arrive withpartial charge, enough to ride for afew minutes. Be sure to fully chargethe power supply before you plan alonger ride.STEP 4:Before you rideEnsure you’ve read the user manualand are familiar with how to usethe bike and the proper safetyprecautions. Always wear a helmet.Once you’ve educated yourself andare ready to ride, start her up and GO!!!Key fobSecuring keyFind UBCO online:ubcobikes.comfb.com/ubcobikesinstagram.com/ubcobikesyoutube.com/ubcobikesJoin the UBCO Owners group atfacebook.com/groups/ubcoowners forinsider tips and tricks from our community. |
Related manuals for UBCO 2X2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine