Ubiquiti GBE Quick Start Manual

Also see for GBE: Quick start guide Quick start guide Quick start guide

Ubiquiti GBE Quick Start Manual Manual pdf 1 page image

7. 2. 2020 GBE Quick Start Guidehttps://dl.ui.com/qsg/GBE/GBE_EN.html 1/18GBE Ball Joint Mount Lock RingMetal Strap Gigabit PoE (24V, 0.5A) withMounting BracketPower CordPackage ContentsInstallation RequirementsClear line of sight between GigaBeam AP and stationPole-mounting: 7 mm socket wrench or screwdriverWall-mounting: wall fastener (not included)Shielded Category 5 (or above) cabling with drain wire should be used for all wiredEthernet connections and should be grounded through the AC ground of the PoE.We recommend that you protect your networks from harmful outdoorenvironments and destructive ESD events with industrial-grade, shielded Ethernetcable from Ubiquiti. For more details, visit ui.com/toughcableSurge protection should be used for all outdoor installations. We recommend thatyou use two Ethernet Surge Protectors, model ETH-SP-G2, one near the deviceand the other at the entry point to the building. The ETH-SP-G2 will absorb powersurges and safely discharge them into the ground.Note: For guidelines about grounding and lightning protection, follow yourlocal electrical regulatory codes.GBE Quick Start Guide