Ude PX-99 Manual
      |
DESCRIPTIONMixer preamplifier with 8 convertible microwave auxiliary inputs (INPUT-1 .... INPUT-8) and 2 outputs level 0 dBu (OUTA, OUT B).The PX-99 is used to assign each input to output A, output B or both(option C), acting as a matrix of 8 inputs / 2 outputs, with total flexibility.Each input can be configured as balanced microphone or as an auxiliaryunbalanced.The microphone inputs have phantom supply and configurablepassword filter.Each entry has: volume control, independent bass and treble.Assignable priority level to level 1 (minimum level of priority) to 8(maximum) for the automatic control signal.VOX function. Each entry has a level sensor with an adjustablethreshold (0 to 50), so when the signal exceeds the trigger level, thechannel opens. This can also be used as an automatic switch signal, andas a noise gate.At each entrance, together with the VOX function (and with priority levelgreater than 1) we can assign the remote function. When the VOXfunction of this input is activated besides open the audio channel, will bea remote contact closure to ground (open collector) in the remote outputterminals,Aor B as appropriate entry.In each outputAand B offers master volume independent.The outputs can adjust the level to 0 dB and -6 dB.The device, in addition, has a limitation that prevents the saturationlevel in the output.Possibility of inserting a coupler module WX-19 in each output.It also has two sets of keys (treble) / (bass) called F1 and F2, whichcan be assigned to any volume control, whether a particular input ormaster.To configure the PX-99 is necessary to go into the USER MODE.During configuration (volume tones, VOX, etc...), the deviceoperates in real time, offering the result of what is done.Once the installation and the configuration are done, leave thetechnical mode. The device is in USER MODE.When you use the display it will shows two bars as vumeter.In USER MODE can influence the volume settings of the bass andtreble for each entry.In addition, at any time, can act directly on the F1 and F2, which willact on what they have assigned.The new settings are stored in non-volatile memory. It means thatwhen you remove and replenish the system, they remain in it.8 inputs for configurable micro / aux (XLR).2 Outputs 0 dBu (XLR).Volume and tone control independent for each input.VOX detector with adjustable threshold for each input.Priority configuration input.Assigning inputs for each output. Configurable.2 Function keys.Alphanumeric display 2x16 characters.MAIN FEATURESUSBTLA GND TLBMIC/AUX 1 MIC/AUX 2 MIC/AUX 3 MIC/AUX 4 MIC/AUX 5 MIC/AUX 6 MIC/AUX 7 MIC/AUX 8 OUT A OUT BREMOTE CONTROL PROGRAM SF-99www.udeaudio.comThe preamplifier PX-99 has a remote control program named SF-99, to run in PC, and it is possible to download it from website. Using this software and connection cable USB type B, you can configure all characteristics of the amplifier: volume, bassand treble, auxiliary input, sensitivity and recuperation time of VOX control, inputs a outputs routing, priority, phantom power, keyword filter, remotecontrol and attenuation of -6dB.Also allows the record of one security copy of configurations for PX-99 installation, so is possible programming the equipment many times if isnecessary.61610.424Arev. 1EQUIPOS Y SISTEMAS MEGAFONÍA / INTERCOM PUBLIC ADDRESS SYSTEMSude@udeaudio.com BARCELONA - SPAINTel.: +34 934 772 854 / +34 609 914 787PX-99DIGITAL PREAMPLIFIER / MATRIX8 INPUTS / 2 OUTPUTS |
Related manuals for Ude PX-99
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine